The Schluter DITRA HEAT E R3 Thermostat is a thermostat with a large touchscreen for use with the Schluter DITRA HEAT Electric Underfloor Heating System.
The Schluter DITRA HEAT E R3 Thermostat features a 8.9cm (3.5″), self-explanatory backlit touchscreen display and a manual mechanical main switch. It comes with pre-set and adjustable timer programs, selectable room settings and an energy consumption display. The user language is adjustable.
This thermostat is rated with a 16 Amp switching capacity at 230v – this equates to a maximum output of 3680 Watts. It is connected directly to the Schluter DITRA HEAT E HK Heating Cable. It comes with two remote temperature sensor probes – both should be installed but only one connected – so that you can use the spare one as a backup should the primary one fail. This sensor probe is also available to purchase separately – Schluter DITRA HEAT E Temperature Sensor Probe. The temperature will be controlled according to the temperature measured by the remote sensor. The heater will be switched on when the temperature drops below the current set point.
For more information on this thermostat refer to page 12 & 13 of the Instruction Guide and page 8 of the Product Data Sheet for the Schluter DITRA HEAT System, linked below. Also view the video for a guide on how to install and first set up the thermostat. For detailed instructions on how to operate the thermostat, please follow the link below to the user manual on the Schluter Systems website.