Phone icon

LTP Mattstone H20

£19.93£79.70 (inc VAT)

Quantity:
SKU: N/A Categories: ,

Description

LTP Mattstone H20 is a natural finish, water based impregnating sealer. It delicately enhances colour while helping protect against staining. LTP Mattstone H20 strongly repels water, oil and grease, and allows the surface to breathe.

LTP Mattstone H20 is for interior and exterior use on all types of natural and artificial stone, quarry, brick, concrete & paving. Suitable for honed, rough cut and polished surfaces.

Directions for use:

Preparation:
Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex, at 1:10. Rinse well to remove residues and leave to dry (24hrs).

Turn off under-floor heating. Test on an inconspicuous area first. Avoid using strong detergents to wash treated surfaces. On higher porosity materials, sufficient LTP Mattstone H20 should be applied wet-in-wet until treated surfaces are fully saturated. Do not use in temperatures under 5°C or over 25°C.

Rough cut, tumbled, textured or riven surfaces:
Shake bottle before use. Apply LTP Mattstone H20 generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply several coats wet-in-wet. After 15 minutes, remove any excess sealer with an absorbent cloth. Do not allow residues to dry on the surface.

Honed, smooth and polished surfaces:
Shake bottle before use. Apply LTP Mattstone H20 generously and evenly using a lint free cloth, lamb’s wool applicator, paint pad or sponge. Ensure even distribution by wiping over several times. After 15 minutes, remove any excess sealer with an absorbent cloth. Polished surfaces should be finished after removal of excess by buffing with a soft lint free cloth or machine with buffing pad. This should be done while the sealer is still wet on the surface. Do not allow residues to dry on the surface.

Coverage:
per 10m2
Lower porosity surfaces: Approximately 1-2 litres.
Higher porosity surfaces: Approximately 3-4 litres.
Polished surfaces: Approximately 0.5 litre.

Storage:
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 4 years for un-opened containers.

Product Datasheet

Click here to view this product on the Manufacturers website.

Additional information

Weight N/A
Option

1 Litre, 5 Litre

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In