LTP Grimex is an intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors.
It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths.
LTP Grimex is suitable for artificial and natural tiles and floors including travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick, external paving and driveways.
To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative.
Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge.
Directions for use:
In mild cases and on absorbent tiles:
Dilute one part LTP Grimex in 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.
In more severe cases:
Dilute one part LTP Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water.
In extremely severe cases:
Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.
Coverage per litre:
In mild cases – approximately 50m²
In more severe cases – approximately 20m²
In extremely severe cases – approximately 5-10m²
Store in a cool, dry, frost-free environment in closed container. Shelf life up to 5 years.