Fila WET ECO Wet-Look Protective Treatment is a water-based. stain-proof sealer and anti-dirt product with a ‘wet-look’ finish for unpolished natural stone surfaces, unpolished agglomerates and terracotta. It prevents the absorption of stains, facilitates dirt removal and is particularly suited for exterior use, but can also be used inside.
Fila WET ECO Wet-Look Protective Treatment is eco-friendly, being water-based. It is a plant-based product, developed using raw materials of organic origin and renewable resources.
Fila WET ECO Wet-Look Protective Treatment has high resistance to heavy traffic and is resistant to weathering; The surface film does not peel or yellow with time and does not alter the frost resistance of terracotta (UNI EN ISO 10545-12). Fila WET ECO also prevents surfaces from flaking, and can be used on outdoor areas subject to vehicle traffic, such as near barbecues and kitchens.
No dilution required: ready to use.
Application: Shake before use. Apply Fila WET ECO evenly and continuously to a clean and dry surface using a flat paintbrush or fleece pad, wetting the grout lines as well. Apply a second coat of the product 2-3 hours later following the same method. Wait at least 12 hours before walking on the surface.
For maintenance it is recommended to use a diluted solution of Fila CLEANER PRO Surface Cleaner.
Caution: For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1 litre of product to 1 litre of water). Do not use on polished surfaces. Do not apply the product externally if rain is forecast. The product cannot be applied to supports with problems connected with rising damp. If Fila WET ECO Wet-Look Protective Treatment has been applied incorrectly or if thorough cleaning is required, remove it using NOPAINT STAR.
Unpolished stones and agglomerates: 10/20m² per litre, single coat
Terracotta: 7/20m² per litre, single coat