Phone icon

Ardex WPM 200 Reinforcing Tape

£60.43 (inc VAT)

Quantity:

Description

Ardex WPM 200 Reinforcing Tape is a waterproofing joint tape for the reinforcement of angles, corners and joints underneath the Ardex WPM 200 Solvent Free Multi Purpose Epoxide Liquid Waterproof Membrane. Comes in 100mm x 15m rolls.

Ardex WPM 200 Reinforcing Tape can be used to lap onto other damp-proof membranes subject to the approval of the manufacturer. It is for the flexible waterproofing of non-pressurised water.

Ardex WPM 200 Reinforcing Tape is a Butyl rubber coated waterproof self-adhesive tape with a removable adhesive liner for ease of use. The release liner is two-piece to assist with the forming of the product into angles. (See Ardex WPM 200 Waterproofing Membrane details schematics for more guidance).

Ardex WPM 200 Reinforcing Tape Application:
Apply the tape adhesive side down, removing the protective liner as you go, and press down to ensure full adhesion contact with the substrate. Cut to the required length with scissors or a suitable knife.  When overlapping between tape runs, the minimum overlap required is 50mm. Apply the tape at room temperature not exceeding 28°C.

Technical Data:
Colour: Grey
Resistance to temperature: min. / max. -30°C / + 60°C
Physical Properties: (approx.) DIN Value Tolerance
Total width (with release): 102 mm +/- 3 mm Tolerance
Product width (without release): 100 mm +/- 3 mm Tolerance
Total thickness (with release): 0,85 mm +/- 0,12 mm Tolerance
Product thickness (without release): 0,77 mm +/- 0,12 mm Tolerance
Total weight (with release): 820 g / m² +/- 40 g / m² Tolerance
Product weight (without release): 730 g / m² +/- 35 g / m² Tolerance
Length per roll: 25 metres – 0,0 m / + 0,25 m Tolerance
Breaking load longitudinal 30 N / 15 mm ≥ 20 N / 15 mm Tolerance
Breaking load lateral 19 N / 15 mm ≥ 15 N / 15 mm Tolerance
Extension break longitudinal 60 % ≥ 35 % Tolerance
Extension break lateral 80 % ≥ 50 % Tolerance
Burst pressure: max. 0,4 bar ≥ 0,2 bar Tolerance
Resistance to water pressure ≥ 0,2 bar
Peel test on neutral PVC carrier ≥ 13 N / 20 mm

Product Datasheet

Click here to view this product on the manufacturers website.

Additional information

Weight 0.7 kg

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In