Fila WET Wet-Effect Protective Sealer is a consolidating protective sealer that gives an enhanced, wet look to rough textured natural stone surfaces, such as split face, tumbled and flamed finishes.
Fila WET Wet-Effect Protective Sealer can be used on unfinished marble and granite surfaces, unpolished natural stone tiles and agglomerates. It protects the treated surface from water and oil. It can also be used to revive and protect masonry kitchen profiles, fret designs of coatings, rosettes, tumbled marble and any interior or exterior coarse stone surface.
Fila WET Wet-Effect Protective Sealer provides a wet effect that can be intensified with several applications. This effect does not yellow with ageing or with any environmental condition. Does not scrape from surface.
No dilution required: Fila WET Wet-Effect Protective Sealer is ready to use.
Application: 1. On a clean and dry surface, apply one even and continuous coat of Fila WET with a brush. 2. After 24 hours repeat treatment in the same way. 3. For very absorbent materials, a third coat may be required to reach the desired wet effect.
Maintenance: Clean the treated surface with a diluted solution of Fila CLEANER PRO Surface Cleaner. In the areas most exposed to weather conditions we recommend applying Fila WET Wet-Effect Protective Sealer again every two years.
Coverage: 10/20m² per litre. (single coat)
Caution: do not apply Fila WET Wet-Effect Protective Sealer externally if rain is forecast during the following 24 hours. Do not walk on floor while it’s drying: wait 24 hours after last product application. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove Fila WET using NOPAINT STAR. The product cannot be applied on supports subject to rising damp and in damp environments where water tends to stagnate (showers, saunas, Turkish baths, etc.).