Description
EcoProTec Natural Finish Stone Sealer is a water-based impregnating sealer for internal and external use on all types of natural and artificial stone, quarry, brick, concrete & paving. It is suitable for use on honed, rough cut and polished surfaces.
EcoProTec Natural Finish Stone Sealer makes minimal changes to the surface character and helps protect against staining. EcoProTec Natural Finish Stone Sealer strongly repels water, oil and grease while allowing the surface to breathe and also helps reduce efflorescence.
Directions for use:
Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of EcoProTec Stone & Tile Intensive Cleaner at a ratio of 1:10 and a white pad. Rinse well to remove residues and leave to dry (24hrs).
Rough cut, tumbled, textured or riven surfaces: Shake bottle before use. Apply EcoProTec Natural Finish Stone Sealer generously and evenly using foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated. On larger external surfaces and patios apply EcoProTec Natural Finish Stone Sealer using a light pressure sprayer.
Honed, smooth and polished surfaces: Shake bottle before use. Apply liberally and evenly using a sealant applicator pad, lint free cloth, lamb’s wool applicator or sponge. Leave surfaces to dry. Remove any residual sealer if still visible after one hour. On vertical surfaces apply from the bottom up.
Aftercare:
Interiors: Routinely sweep and wash the floor. Clean walls, floors and work surfaces with EcoProTec Natural Stone & Porcelain Aftercare Cleaner.
Exterior: Routinely sweep areas. Wash down with EcoProTec Natural Stone & Porcelain Aftercare Cleaner once or twice a year to keep surfaces free from organic stains.
Please note:
Dried on residues of over applied sealer can be removed by buffing with micro fibre cloth or rotary machine with buffing pad. If dried on residues are left too long and difficult to buff away; apply a little soapy water and gently scrub with a white emulsifying pad, rinse and leave to dry.
Empty containers are recyclable. Active ingredients are water soluble and inert once cured.
Turn off under-floor heating prior to sealing with EcoProTec Natural Finish Stone Sealer. If in doubt, test on an inconspicuous area prior to general application. Avoid using strong detergents to wash treated surfaces. On higher porosity materials sufficient sealer should be applied until treated surfaces are fully saturated.
Do not use EcoProTec Natural Finish Stone Sealer in temperatures under 5°C or over 25°C. Clean application tools and brushes with water after use.
Coverage:
Lower Porosity Surfaces: 15m²/Litre
Higher Porosity Surfaces: 7.5m²/Litre
Polished Surfaces: 30m²/Litre
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet