weberfloor Flex Levelling Compound 25kg

Description

weberfloor Flex Levelling Compound is a high-performance, fibre-modified, cement-based, self-smoothing, rapid-setting floor screed with low dust technology and formulated from special cements, aggregates and chemical admixtures. Supplied in 25kg bags.

It is designed for use in residential and commercial areas, correcting surface irregularities on difficult surfaces, including wood, in interior situations, ideal for rapid completion of tiling projects.

weberfloor Flex Levelling Compound features Weber Low Dust Technology, which improves the comfort of applicators by reducing the amount of dust released into the local atmosphere when the product is mixed. It also has excellent levelling properties and can be built up to 50mm in depth.

weberfloor Flex Levelling Compound is rapid setting – tiles can be laid after 1 – 2 hours. It bonds well to difficult substrates and as it is fibre-modified it has the flexibility and resilience to absorb limited movement, such as on substrates with under-floor heating and wooden substrates.

weberfloor Flex Levelling Compound can be used for levelling:

• Cement screeds, concrete slabs and pre-cast elements
• Floors with under-floor heating or under tile warming
• Wooden flooring (plywood and particle board panels)
• Existing ceramic and rigid plastic tiles
• Floating floors

It is suitable for covering with:

• Tiles
• Flexible floor coverings
• Parquet flooring

Please Note: weberfloor Flex Levelling Compound is NOT suitable for:

• Exterior use
• Floors with rising damp
• Industrial areas
• As a wearing surface

Priming the substrate prior to application with weber PR360 Tiling Primer is recommended to improve adhesion, reduce air bubbles, improve the flow of the screed and prevent de-watering. In situations that will be very humid, such as bathrooms, the webersys Protect Waterproof Tanking System may be applied over weberfloor Flex.

A thin layer of the weberfloor Level Floor Levelling Compound can be used on top of weberfloor Flex prior to the application of flexible floor coverings.

Technical Data:
Application temperature: +5°C to + 30°C
Minimum substrate strength: 1 N/mm2
Minimum thickness (under tile warming): >3mm over the heating wires
Minimum thickness (underfloor heating): >15mm over the heating pipes
Minimum thickness (over slip membrane, solid substrate): 20mm
Minimum thickness (floating floor i.e. insulation board): 25mm (with weberfloor 4945 fibre mesh)
Minimum thickness (over wood): 10mm
Maximum thickness: 50mm
Water demand: 5 litres/25kg (20%)
Compressive strength: C 25
Flexural strength: F 5
Approx. material consumption: 1.7kg/m2/mm
Hardening time (before foot traffic): 1 – 2 hours
Drying time (before tiling): 1 – 2 hours
Drying time before covering with carpet, plastic or wood: 24 hours at 5mm thick
Working time (pot life): 20 minutes

weber Rewards:
Being part of the weber Rewards Loyalty Scheme means that you get points every time you purchase weber products. Once you have signed up to the scheme via the weber Rewards website, you can claim points for every purchase of weber products and then exchange these points for rewards such as merchandise, electronic products, experiences and discount vouchers.

Product Datasheet

Click here to view this product on the manufacturers website.