UltraTile ProClean Xtreme Clean Heavy Duty Cleaner

Description

UltraTile ProClean Xtreme Clean Heavy Duty Cleaner is a professional heavy duty cleaner suitable for use on ceramic, porcelain and many other types of natural stone surfaces, including polished marble and limestone. Its safe, non acid formula will not damage acid sensitive stone types such as limestone and the fast and easy application will eliminate stubborn deposits with ease. UltraTile ProClean Xtreme Clean Heavy Duty Cleaner contains a combination of soluble solvents and cleaning agents which are very effective in dissolving ingrained dirt, wax layers, grease and many other problematic stains or coatings. It can also be used as a degreaser when applying tile on tile or when levelling over tiles. This product will not remove cement & grout stain residues. Please use UltraTile ProClean Resin Off or UltraTile ProClean Grout Haze Remover instead for those.

Suitable surface & substrates:

• Sandstone
• Limestone
• Slate
• Travertine
• Terracotta
• Quarry Tile
• Porcelain & Ceramics
• Concrete
• Highly Textured Tiles
• Slip Resistant Tiles

Directions for use:

1. Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use – read these instructions fully before application. If you experience difficulties using this product, please contact the Instarmac technical support team.
2. Dependant on the stained or soiled area, UltraTile ProClean Xtreme Clean Heavy Duty Cleaner can be used neat for removing waxes / coatings or diluted up to 10 parts water to 1 part for heavy soiled areas. Mixing with hot water can help to improve product effectiveness.
3. Pre-wet the area with clean water before applying the cleaner to the soiled area. Allow UltraTile ProClean Xtreme Clean Heavy Duty Cleaner to dwell for approximately 15-20 minutes, not allowing it to dry on the surface.
4. After 15-20 minutes agitate with a stiff brush and clean water, scrub and rinse thoroughly with clean water. Particular attention should be paid to highly textured surfaces. In cases of heavy soiling or staining, repeat the process increasing the cleaner concentration ratio if necessary.

PLEASE NOTE: UltraTile ProClean Xtreme Clean Heavy Duty Cleaner may cause damage to sensitive surfaces, protect these areas with masking material, i.e. painted or varnished surfaces etc. Always test the product in an inconspicuous area on-site to determine suitability for intended use.

Coverage: UltraTile ProClean Xtreme Clean Heavy Duty Cleaner will cover up to 25m² per litre. Coverage will vary depending on surface contamination and dilution rate used.

Points of note:
Avoid contact when using UltraTile ProClean Xtreme Clean Heavy Duty Cleaner in proximity of sensitive surfaces including fabrics, metals, varnished or painted surfaces. Stubborn, aged deposits and heavily textured surfaces may require repeat applications. Always test this product in an inconspicuous area. It remains the responsibility of the end user to check the suitability of the product.

Technical Data:
Unit Size: 1L Bottle
Colour: Blue
Application Temperatures: 5°C to 25°C
ph Value: 11-13
Dwell Time Guidance: N/A
Applications / Coats: 1-2 applications
Application Method: Mop / Sponge / Brush
Dilution: Varies, see directions for use

Product Datasheet

Click here to view this product on the Manufacturers website.