UltraTile ProClean Resin-Off Grout Residue Remover

Description

UltraTile ProClean Resin-Off Grout Residue Remover is a specialist stripping formula for the targeted removal of resins and polymer surface residues from tiles and paving. UltraTile ProClean Resin-Off Grout Residue Remover can also remove excess sealer deposits, coatings, adhesives and plastic residues. Suitable for all types of external stone surfaces, this easy to apply gel-like fluid allows you to target specific patches with minimal mess and wastage.

Suitable surface & substrates:

• Sandstone
• Limestone
• Slate
• Travertine
• Terracotta
• Quarry Tile
• Ceramic
• Porcelain
• Highly Textured Tiles
• Slip Resistant Tiles

Directions for use:

1. Always perform a test in an inconspicuous area on-site to check suitability of UltraTile ProClean Resin-Off Grout Residue Remover, prior to use – read these instructions fully before application. If you experience difficulties using this product, please contact the Instarmac technical support team.
2. Always ensure you have adequate PPE and suitable protective clothing.
3. Prepare the area by cleaning off loose debris.
4. Pre-wet the surface area with clean water. Apply UltraTile ProClean Resin-Off Grout Residue Remover generously to the affected areas and leave to dwell for 15-20 minutes maximum. Agitate with a stiff brush or decking brush and wash off. Particular attention should be paid to highly textured surfaces. If using externally, after rinsing, you may pressure wash for faster results.
5. After allowing the surface to dry, inspect and if any stubborn patches remain you may repeat the process.

Please note: Do not apply UltraTile ProClean Resin-Off Grout Residue Remover until you have completed a test patch and made sure of the effectiveness and end result on your surface. Cover areas not to be treated with suitable protective materials. Apply between 5°C and 20°C.

Coverage: UltraTile ProClean Resin-Off Grout Residue Remover will cover 5-10m² per litre. Apply neat. Coverage will vary depending on levels and age of deposits.

Points of note: UltraTile ProClean Resin-Off Grout Residue Remover is designed to remove polymer residue from brush in compounds and will not affect mortar, cement or aggregate deposits. To remove mortar based haze or staining you should use UltraTile ProClean Grout Haze Remover. Always test this product in an inconspicuous area. It remains the responsibility of the end user to check the suitability of the product.

Technical Data:
Unit Size: 1L Bottle
Colour: Green / Blue
Application Temperatures: 5°C to 25°C
ph Value: 11-13
Dwell Time Guidance: 15-20 minutes, depending on temperatures, substrate and site conditions.
Applications / Coats: 1-2 applications
Application Method: Roller / Sponge / Brush
Dilution: Undiluted

Product Datasheet

Click here to view this product on the Manufacturers website.