UltraTile ProClean Grout Haze Remover

Description

UltraTile ProClean Grout Haze Remover effortlessly removes residues such as mortar and cement grout, efflorescence, encrusted and engrained dirt, as well as natural calcium & limescale deposits. Use indoors and outdoors after installation process, it is suitable for all acid resistant surfaces, including ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete and other types of natural stone.

UltraTile ProClean Grout Haze Remover is not suitable for use with brush-in sand grout or around acid sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.

Suitable surface & substrates:

• Sandstone
• Porcelain
• Slate
• Ceramic
• Terracotta
• Quarry Tile
• Granite
• Non acid-sensitive tiled surfaces

Directions for use:

1. Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use – read these instructions fully before application. If you experience difficulties using this product, please contact the Instarmac technical support team.
2. Dependent on degree of contamination, UltraTile ProClean Grout Haze Remover can be used neat or diluted up to 1:10 with clean water.
3. Pre-wet the surface, apply generously and allow the product to dwell for a few minutes before agitating and rinsing off with plenty of clean water.
4. Repeat the process if necessary. If using Grout Haze Remover indoors ensure good ventilation during and after use.

PLEASE NOTE: When using internally, ventilate working area by opening doors and windows.

Coverage: UltraTile ProClean Grout Haze Remover will cover up to 100m² per litre. Coverage will vary depending on surface contamination and dilution rate used.

Points of note: Please ensure that appropriate PPE is used when using UltraTile ProClean Grout Haze Remover. Protect sensitive surfaces as even minor splashes can cause damage. Not suitable for day to day cleaning, if you require a mild catch-all cleaner we recommend UltraTile ProClean Porcelain Tile & Stone Floor Cleaner. Always protect these areas. Always test this product in an inconspicuous area. It remains the responsibility of the end user to check the suitability of the product.

Technical Data:
Unit Size: 1L Bottle
Colours: Red
Application Temperatures: 5°C to 25°C
ph Value: 1-2
Dwell Time Guidance: 2-5 minutes, depending on temperatures, substrate and site conditions.
Applications / Coats: 1-2 applications
Application Method: Sponge / Brush
Dilution: Varies, see directions for use

Product Datasheet

Click here to view this product on the Manufacturers website.