Description
The Mapei Mapeheat Thermo Touch Thermostat is an “in wall” mounted gloss finish programmable thermostat for the Mapei Mapeheat Membrane & Cable floor heating system.
Features & Benefits:
• Large clear display
• Intelligent leaf button: – Changes operating modes, turns the thermostat ON/OFF, saves changes & energises the thermostat when in standby mode (motion sense technology)
• Built-in 4 event timer function
• 2 operation modes: Manual on/off programme (1 temperature set-point) & 1 editable pre-programme (4 temperature set-points per day)
• 3 Sensor modes: Room sensing only / Floor sensing only / Room sensing mode with floor temperature limiter
• Easy navigation
• The Mapei Mapeheat Thermo Touch Thermostat comes with a manufacturers limited 2 year warranty.
The Mapei Mapeheat Thermo Touch Thermostat is supplied complete with floor sensor, adaption frame and installation manual.
Technical Data:
Supply voltage: 230 VAC (+10% / -15%) – 50 Hz
Relay output: 230 VAC, maximum 13A resistive load (max. 3000W)
Power consumption (Stand-by): 3VA
Ambient operating temperature: 0°C to +40°C, 5% to 95% RH (non condensing)
Switching hysteresis: 1K (Factory settings adjustable between 0.5 – 2.0K)
Terminals: Max. 2.5 mm²
Protection class: IP 21
Sensor: The Mapei Mapeheat Thermo Touch Thermostat features an external floor sensor (range +5°C to +35°C) – With 3 meter cable (max. extension 100 m with 2 x 1.5 mm²) – Type NTC 10K at +25°C Internal room sensor (range +5°C to +40°C)
Transport – Ambient temperature: –10°C to +60°C
Approvals: CE, UKCA, RoHS, WEEE
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet