Description

EcoProTec Patio Sealer is a water based impregnating sealer for all types of natural stone and concrete paving.

EcoProTec Patio Sealer is suitable for honed, rough cut, flamed and brushed stone surfaces.

EcoProTec Patio Sealer provides a delicately enhanced natural finish and helps protect against staining. It strongly repels water, oil, and grease while allowing the surface to breathe. It also helps reduce efflorescence.

Directions for use:

Preparation: Ensure surface to be treated is completely clean, dry, and free from dirt, grime, cement, and grout. First wash surfaces with a dilute solution of EcoProTec Intensive Cleaner 1: 5 and scrub with a nylon scrubbing pad or deck brush. Rinse well with water and a hose to remove any released residues and leave to dry (24hrs).

Application: Shake bottle before use. Apply EcoProTec Patio Sealer evenly using foam roller, paint brush or light pressure sprayer. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.
On vertical surfaces always apply from the bottom up and wipe up any drips if they occur.
Do not use when surfaces are very cold or very hot. Ideally between 5 – 25°C.
Always test on a small area before general application to help establish best method and optimum number of coats required.

Please note:
Empty containers are recyclable. Active ingredients are water soluble and inert once cured.
On higher porosity materials sufficient sealer should be applied until treated surfaces are fully saturated. Saturation has normally been achieved when an even layer of sealer is still visible on the surface after 20 minutes. Leave it to dry.
Do not use EcoProTec Patio Sealer in temperatures under 5°C or over 25°C. Clean application tools and brushes with water after use.

Coverage:
Honed Surfaces: 5 Litres will cover 150m²
Medium Porosity Surfaces: 5 Litres will cover 75m²
Higher Porosity Surfaces: 5 Litres will cover 37.5m²