Description
EcoProTec Colour Enhancing Stone Sealer is a colour enhancing, water based impregnating sealer for internal and external use. It is suitable for all types of natural and artificial stone, quarry, brick, concrete & paving. Honed, rough cut and polished surfaces.
EcoProTec Colour Enhancing Stone Sealer strongly repels water, oil and grease while also allowing the surface to breathe and helping to reduce efflorescence. It provides an enhanced natural finish and helps protect against staining.
Directions for use:
Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of EcoProTec Stone & Tile Intensive Cleaner at a dilution ratio of 1:10 and a white pad. Rinse well to remove residues and leave to dry (24hrs).
Rough cut, tumbled, textured or riven surfaces: Shake bottle before use. Apply EcoProTec Colour Enhancing Stone Sealer generously and evenly using foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.
Honed, smooth and polished surfaces: Shake bottle before use. Apply EcoProTec Colour Enhancing Stone Sealer liberally and evenly using a sealant applicator pad, lint free cloth, lamb’s wool applicator or sponge. Leave surfaces to dry. Remove any residual sealer if still visible after one hour.
On vertical surfaces apply EcoProTec Colour Enhancing Stone Sealer from the bottom up.
Aftercare:
Routinely sweep and wash the floor. Clean walls, floors and work surfaces with EcoProTec Natural Stone & porcelain Aftercare Cleaner.
Please note:
Dried on over applied sealer can be removed by buffing with micro fibre cloth or rotary machine with buffing pad. If dried on residues are left too long and difficult to buff away; apply a little soapy water and gently scrub with a white emulsifying pad, rinse and leave to dry.
Empty containers are recyclable. Active ingredients are water soluble and inert once cured.
Turn off under-floor heating prior to using EcoProTec Colour Enhancing Stone Sealer. If in doubt, test on an inconspicuous area prior to general application. Avoid using strong detergents to wash treated surfaces. On higher porosity materials sufficient EcoProTec Colour Enhancing Stone Sealer should be applied until treated surfaces are fully saturated.
Do not use in temperatures under 5°C or over 25°C. Clean application tools and brushes with water after use.
Coverage:
Lower Porosity Surfaces: 15m²/Litre
Higher Porosity Surfaces: 7.5m²/Litre
Polished Surfaces: 50m²/Litre
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet