Ultra Tile Fix ProLevel Two is a two-part flexible floor levelling compound for application depths from 2-15mm. Consists of two parts, 20kg bag of powder and 5 Litre bottle of additive.
Ultra Tile Fix ProLevel Two is a mid-strength smoothing underlayment. Ultra Tile Fix ProLevel Two consists of a powdered blend of cements, graded fillers and additives, and a pre-gauged polymer liquid. Tiles can be applied to the internal subfloors in as little as 24 hours. Its fast set time (in good ambient conditions) enables light foot traffic in 2.5 hours.
Ultra Tile Fix ProLevel Two is suitable for a wide range of substrates – concrete subfloors, tamped or pan floated concrete, sand/cement screeds, existing smoothing underlayments, radiant electrical underfloor heating systems, vinyl tiles, UltraFloor DPM IT, presmoothing prior to DPM or MVS, terrazzo/granolithic ceramic tiles, anhydrite/calcium sulphate/gypsum based screeds, plywood/tile backer board and warm water underfloor heating.
Shake the pre-gauged bottle of liquid prior to opening. Pour the entire contents of the liquid into an oversized bucket (20 litres or more capacity). Gradually add the powder whilst continually mixing using an electric drill fitted with a power whisk, suitable for use with cement materials. After completely adding the powder, continue mixing for a further 2 minutes, keeping the whisk below the surface of the product to minimise air entrainment, until a lump free creamy material is attained. Ultra Tile Fix ProLevel Two should only be mixed as single units. Do not add further liquid or water.
Pour onto the floor and spread with a smooth edge steel trowel. Ultra Tile Fix ProLevel Two has exceptional flow characteristics, a spiked roller may be used to further improve the finish particularly between adjacent units of product. Only spike roll whilst the product is still in its fluid state (immediately due to the limited workability and rapid setting nature).
Working time at 20°C: *20-30 Minutes
Walk on hardness time at 20°C: *2.5 Hours (3mm application)
Commence the tiling process: 24 Hours (2-15mm application)
(*Depending on substrate porosity, nature of flooring and notes in Curing & Drying above.)
Compressive Strength (N/mm²): 28 Days: 25.0 (to BS EN 13892-2)
Flexural Strength (N/mm²): 28 Days: 5 (to BS EN 13892-2)
19.2 bags + 8.1 x 10kg units aggregate