Tilemaster Standard Set Setaflex is a polymer modified, flexible standard setting cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Comes in white or grey, in 20kg bags. Pallet rates are also available (48 x 20kg bags).
Tilemaster Standard Set Setaflex has been specially formulated for fixing a large variety of tiles: Ceramics, Porcelain, Marble, Travertine, Limestone, Slate, Granite, Terracotta, Mosaics, and Quarry tiles.
Tilemaster Standard Set Setaflex is suitable for use on substrates such as: Sand/Cement Screed, Concrete, Plywood Overlay (12mm min), Electric Underfloor Heating, Water/Wet System Underfloor Heating, Tile Backer Boards, Anhydrite Screeds, Plaster, Plasterboard, Fibre Cement Sheet, Cement/Sand Render and Concrete Brick/Block.
Formulated to give an extended bucket life of approximately 3 hours, perfect for areas where longer working times are required.
Tilemaster Standard Set Setaflex is ideal for areas subject to prolonged or permanent wet conditions such as swimming pools. Can be used internally and externally and it is unaffected by frost after setting.
Standard Conformity: Conforms to BS EN 12004 C2 TE S1
Bed Thickness: 3mm – 12mm
Coverage: 20kg will cover approximately 5 – 6 m² at 3mm bed application
Open Time/Working Time: 3 – 4 hours at 20°C
Before Grouting: Approximately 24 hours depending on temperature and substrate The set time will be increased by lower temperatures and reduced at higher temperatures *Tiling onto an impervious substrate with a non-porous tile will increase the set time
Storage: Store unopened, clear of the ground in cool, dry conditions
Shelf Life: Stored correctly this product has a shelf life of 6 months
Colours: Grey and White
Pack Sizes: 20kg
Note: All work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385