Description
The Schluter TREP EFK Stair Nosing Profile is a version of the Schluter TREP E profile without an anchoring leg or edge profile for adhering to the surface of existing stair nosings.
Supplied in lengths of 2.5 metres.
The Schluter TREP EFK Profile is designed to be installed in a milled groove inset in the top surface of the stair tread or simply retrofitted to the surface. It adds a high degree of safety due to the special slip resistant design of the tread (test certificate by the Institute for Occupational Safety (IFA), slip resistance classification group R10 V6) and the excellent visibility of the step nosings.
This profile is made from marine grade stainless steel (V4A) and is particularly well suited for applications that, in addition to heavy mechanical stresses, require resistance to chemicals (e.g. exposure to acids, alkalis, oils, greases and solvents). However even stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chloride and brine concentrations.
Schluter TREP EFK Stair Nosing Profile Installation:
- Clean the stair nosings and repair damaged areas if necessary.
- Clean and degrease the underside of the profiles.
- Adhere the profile by fully embedding into a suitable adhesive (e.g. epoxy resin or Schluter KERDI FIX adhesive, depending on the substrate). Note: The upper profile edge is approx. 2mm higher than the stair covering.
Click here to view this product on the Manufacturers website.
Reviews
There are no reviews yet