Description
Mapei UltraCare Keranet Easy is a ready to use acid spray cleaning product that also removes cementitious residues immediately after grouting. Removes surface residues of cement, lime and efflorescence. Suitable for cleaning the back side of porcelain tiles.
Mapei UltraCare Keranet Easy comes in 750ml spray bottles.
Mapei UltraCare Keranet Easy is used for cleaning internal and external surfaces that have been grouted using cementitious grouts and can be used on all acid resistant materials, such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone.
Mapei UltraCare Keranet Easy is a simple and ready to use product to save time as it can be used also immediately after grouting. It is suitable for use on porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone. When installing large format tiles, it is perfect for removing fresh cementitious grout residues to avoid the “frame effect”. It is also suitable for cleaning the back side of tiles prior to installation, especially with large formats.
Mapei UltraCare Keranet Easy is a liquid acid cleaner available in 3% aqueous solution; the product is ready to use and does not require any dilution. UltraCare Keranet Easy is based on a special inorganic acid, whose advantage is to have an aggressiveness towards cement grout residues and efflorescence’s, equal to that of much stronger acids (muriatic/chloridian, sulfuric, etc.), without developing, like the latter, very dangerous toxic fumes. In any case, using the product in well-ventilated areas is recommended.
Mapei UltraCare Keranet Easy when properly used, will not damage the grout joint even when using coloured grouts.
Application Method:
When used immediately after cementitious grouts, wait until it loses its plasticity and becomes opaque (the time required depends on the type of grouting product used), then spray UltraCare Keranet Easy evenly on the surface to be cleaned, leave it to react for 1-2 minutes and then proceed with a first cleaning using a moist cellulose sponge (MAPEI sponge type), working diagonally over the grout joints. Rinse the sponge frequently using two different containers of water, one to remove the excess grout from the sponge and the other for rinsing the sponge.
On light cured grout residues spray Mapei UltraCare Keranet Easy evenly over the entire area at a suitable distance, working in manageable areas, letting it act for a few minutes. Then wipe over the surface removing it with the use of a moist cellulose sponge as described above.
Mapei UltraCare Keranet Easy may also be used on cured grouts with light residues, otherwise use UltraCare Keranet in compliance with the indications of the specific technical data sheet.
CAUTION:
• Never use Mapei UltraCare Keranet Easy on marble or calcareous stone.
• Do not use UltraCare Keranet Easy on ceramic tiles or enameled baths with non-acid-resistant enamel.
• Use UltraCare Keranet Easy with rubber gloves and glasses, paying attention to splashes on the skin or clothes.
• Make sure before use that the surfaces to be cleaned are acid-resistant. It is advisable, in doubtful cases, to carry out preliminary tests.
• Do not allow UltraCare Keranet Easy to react for too long and rinse thoroughly to remove all traces of the product; it could discolour the grout.
• UltraCare Keranet Easy does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test is always recommended.
Consumption:
Depending on the needs, it can vary based on the degree and type of dirt and the surface to be treated.
Technical Data:
Consistency: liquid
Colour: transparent
Density: 1.00 g/cm³
pH: 1.4
Application temperature range: 0°C to +40°C
Waiting time before rinsing: 5 minutes
Click here to view this product on the Manufacturers website.
Reviews
There are no reviews yet