Description

LTP Quartzclean is an intensive foaming cleaner that deep cleans polished and unpolished quartz surfaces to remove all types of stubborn dirt and grease. Can also be used on laminate and acrylic surfaces.

LTP Quartzclean is suitable for internal and external use.

This product is also available as part of the LTP Quartz Care Kit.

Directions for use:

Preparation: Areas to be cleaned should be free from dust before application. Mask and protect any surfaces that are not to be cleaned.

Application: Shake can well before use. Hold can 15-20 cm from the surface and spray LTP Quartzclean on evenly using a sweeping motion. Allow the foam to dissolve. Add a little water and agitate with a white pad or similar mild abrasive. Rinse and extract the released residues using a sponge and water. Rub dry using a micro-fibre LTP Buffing Cloth or similar absorbent towel to finish.

Please note:
Do not spray LTP Quartzclean on to painted or stained surfaces such as cabinets and stained timber skirting boards. Mask and protect these surfaces before application. Use only in open or well ventilated areas. It is recommended that a suitable respiratory mask be worn at all times. Overspray on some surfaces, may in some cases cause damage; in which case wipe up and rinse immediately with clean water. Always test LTP Quartzclean on an inconspicuous area for suitability before general application.

Shake can well before use.

Coverage:
5-10m² per 250ml can depending upon number of applications required.

Product Datasheet

Click here to view this product on the manufacturers website.