Lithofin MN Polish Liquid Wax is a special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). It is a solvent based polishing liquid containing high quality waxes. It does not contain any environmentally problematic CHC’s like trichlorethen or similar solvents.
Lithofin MN Polish Liquid Wax is for the initial treatment of newly installed natural and engineered stone surfaces, window sills, table tops, etc. to improve the appearance and provide protection. Also to freshen up worn and dull stone surfaces.
Lithofin MN Polish Liquid Wax contains high quality raw materials that guarantee optimal protective and maintenance properties, easy polishing and high durability. The first application already produces a polishable film, which can be brought to a high gloss through polishing by hand or machine.
Lithofin MN Polish Liquid Wax improves the stone’s appearance by enhancing the colour structure and facilitates regular maintenance.
Lithofin MN Polish Liquid Wax is resistant to regular household dirt and salt, not resistant to petrol and similar substances. Depending on the level of wear and tear, the product’s effect will last for several months.
Surfaces: all finely honed and polished natural stones such as marble, limestone, travertine, slate, granite, etc. as well as engineered stone, agglo marble and terrazzo.
Lithofin MN Polish Liquid Wax Technical Data:
Density: approx. 0,80 g/cm³
Appearance: liquid, colourless, clear
Flash Point: >23°C
Solubility in Water: not soluble
Directions for Use:
Shake bottle before use. Thinly and evenly apply with a clean cloth and allow the product to dry. Then polish with a soft linen cloth or polishing pad. Highly absorbent surfaces may have to be treated more than once.
Please Note: the surface to be treated must be completely clean and dry. Do not apply in temperatures below 15°C and above 25°C. Protect surfaces sensitive to solvents. The product is suitable for indoor use only. Well honed surfaces are a prerequisite for good results. In case the application is patchy, polish off with steel wool (ooo). Layer forming products affect the slip resistant properties of the surface. We highly recommend trying in an inconspicuous area prior to use.
15 to 20m²/Ltr. depending on the surface.
Drying Time: after 5-10 min. ready for polish, completely dry after 50-60 min.
Keep closed and dry at room temperature. In low temperatures, the product may become cloudy. Place bottle in hot water and shake until clear again. Shelf life approx. three years.