Lithofin MN Care Sheen is a special product from the LITHOFIN-Range for marble and natural stone (MN). It is a solvent free emulsion based on natural waxes, high quality polymers as well as cleaning and self-glossing additives.
Lithofin MN Care Sheen forms an easy-to-polish protective film and enhances the appearance of the surface by slightly intensifying the colour structure. It is for touching up and protecting polished marble and granite floor surfaces, which have become matt or dull.
Lithofin MN Care Sheen contains cleaning substances and can be used for regular maintenance on surfaces subject to low levels of wear and tear. Also suitable as an initial treatment of rough and honed surfaces where a satin gloss is required. For indoor use only.
Density: approx. 1,00 g/cm³
Appearance: liquid, whitish
pH-Value: approx. 9
Flash Point: n.a.
Solubility in Water: very good
Directions for Use:
When using Lithofin MN Care Sheen as an initial treatment, dilute the product 1:1 with water and apply it to the surface with a clean cloth or sponge. After approx. 30 to 40 minutes the surface can be polished by hand or machine. For touching up and maintenance use one cup of product per 10 litres of wiping water. On worn surfaces use a bit more. Do not walk on the surface until the product has dried. Drying Time: approx. 30 to 40 minutes.
Coverage: approx. 200m² per litre when used in wiping water, approx. 20m² when used undiluted.
Keep closed and cool. Frost-free. Shelf life of up to three years.
Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using MN Wash & Clean or EASY CARE for three or four washes and then using Lithofin MN Care Sheen once.
The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.