Lithofin MN Wash & Clean is a special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). It is a high-yielding cleaning and maintenance concentrate, which contains active maintenance components and mildly alkaline cleaning agents based on natural soaps.
Lithofin MN Wash & Clean contains highly effective agents that take up the dirt so it can easily be removed by wiping. The remaining extremely thin care film is free of wax and does not build any layers. With continued use, the surface’s appearance will improve in colour and structure. Leaves a pleasant odour.
Lithofin MN Wash & Clean is for regular maintenance cleaning of all marble and natural stone surfaces. Surfaces: all natural stones such as carrara, travertine, jura marble, porphyr, serizzo, sandstone as well as engineered stone. The surfaces can be polished, honed or rough, impregnated sealed or untreated.
Density: 1,0 g/cm³
pH-Value: approx. 10 (concentrate)
Appearance: viscous, yellowish
Solubility in Water: complete
Directions for Use:
Lithofin MN Wash & Clean is always added to lukewarm water. One squirt (approx. 20ml) per 10 litres of water. In case of absorbent, dirty surfaces use a bit more. After wiping, allow the residues to dry on the surface, do not rinse with clear water. Use either a floor mop, cloth or cleaning machine for wiping.
Coverage: The product is a high-yielding concentrate and very economical. On large areas which are machine cleaned daily approx. 3 litres per 100m² will be needed per month. Advice: in areas subject to heavy wear and tear and on very dirty surfaces, it may be necessary to occasionally use MN Power Clean.
Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using the product three to four times, then using MN Care Sheen once.
Keep closed and cool. Not above 25°C. Shelf life of up to five years.