Description

HG Tile Stain Remover removes grease and oil stains from porcelain floor tiles, flagstones, natural stone, concrete and cement. HG Tile Stain Remover is also suitable for removing epoxy residue.

HG Tile Stain Remover is supplied in 500ml bottles.

HG Tile Stain Remover is designated as Product 21 in the HG Product Matrix.

Application:

Follow the steps below for correct use of this product.

For removing stains:

Shake HG Tile Stain Remover well and pour onto the area to be treated. Use undiluted for extremely dirty areas, for mild dirt dilute the stain remover to a ratio of max. 1:5 with (preferably) warm water.
Scrub with a stiff broom or brush and leave the stain remover to work for 5 to 10 minutes.
Then rinse with lots of water.
For very absorbent surfaces the treatment may need to be repeated once or twice.

To remove epoxy residues:

Shake the stain remover well before use and use undiluted.
Scrub and then leave to work for about 20 minutes, then scrub again.
Then rinse with lots of water.

Please note: Transport and store the bottle upright. If the floors have a protective coating, that coating may also be removed by this product. Apply a new protective sealer or coating after treatment with this product. Avoid spattering onto painted or varnished surfaces. Remove spilled liquid immediately with plenty of water. Ventilate well when using this product.

Click here to view this product on the manufacturer’s website.