Description
The Mexco Router Finger allows for milling, chamfering, drilling and expansion cutting in all hard materials such as porcelain and granite. No water is required due to a core filled with Mexco Cooling Wax that melts, lubricates and cools the bit when milling.
The Mexco Router Finger measures 20mm in diameter.
Key Features:
- M14 Universal Thread for use with Angle Grinders
- No Water Required – Wax lubricated and cooled
- Diamond Tipped – For a professional finish
The Mexco Router Finger can be used with many materials:
- Porcelain
- Ceramics
- Stoneware
- Natural and Artificial Stone
- Granite
- Marble
- Concrete
Instructions for use:
Ensure you are using the correct type of machine for the drilling application (refer to the recommended RPM and machine instructions). Ensure all forms of percussion or hammer action are turned OFF.
• To start drilling, use a Mexco suction cup guide to enable an accurately positioned hole. Alternatively place the drill at a 30 degree angle. Drill until tile drill bit starts to penetrate the material. Once the hole has started to form, bring the drill up into the upright position and continue.
• As the tile drill starts to work, the heat will cause the wax to melt, lubricating the cutting surface.
• Periodically remove the bit from the cut to allow cooling.
• For horizontal drilling minimal pressure is required.
• For vertical drilling the weight of the machine will give sufficient pressure.
• Ensure periodic removal of debris from tip of the bit as a build-up of dust and debris will prevent the wax from lubricating the tip and shorten the lifetime of the drill bit considerably.
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet