Description
The Mexco Diamond Hole Cutters range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to its slotted barrel.
The Mexco Diamond Hole Cutters feature an M14 threaded fitting, suitable for M14 thread Angle Grinders although an M14 to Hex adaptor can be purchased separately for use with a High Speed Drill.
Mexco Diamond Hole Cutters are available in the following diameters: 18mm, 20mm, 25mm, 32mm, 35mm, 38mm, 45mm, 50mm, 60mm, 68mm, 75mm, 82mm, 91mm, and 110mm.
Key Features:
- M14 Universal Thread for use with Angle Grinders
- Slotted Barrels for ease of stock removal and cooling
- No Water Required
- Diamond Tipped – For a professional finish
Mexco Diamond Hole Cutters can be used in many applications, such as:
- Bathroom Fittings
- Kitchen Fittings
- Porcelain
- Ceramic Tiles
- Stone Tiles
- Stone Worktops
Instructions for use:
Ensure you are using the correct type of machine for the drilling application (refer to the recommended RPM and machine instructions). Ensure all forms of percussion or hammer action are turned OFF.
• To start drilling, use a Mexco suction cup guide to enable an accurately positioned hole. Alternatively place the drill at a 30 degree angle. Drill until tile drill bit starts to penetrate the material. Once the hole has started to form, bring the drill up into the upright position and continue.
• Periodically remove the bit from the cut to allow cooling.
• For horizontal drilling minimal pressure is required.
• For vertical drilling the weight of the machine will give sufficient pressure.
• The tip of the drill bit will become HOT, please handle with care and wear suitable PPE.
• Use on high speed drill (1800rpm) predominately this will be a corded machine not a cordless.
• Only use for drilling the tile, not the material behind the tile. Use appropriate drill bit following penetration of tile.
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet