Description
Lithofin MN Stain Stop ECO protects absorbent natural stone against staining renders surfaces water and oil repellent. It is water based and nearly odourless.
Lithofin MN Stain Stop ECO contains highly active water and oil repellent polymers ensure that this easy to apply treatment offers optimal results. Lithofin MN Stain Stop ECO provides the ultimate protection against water and oil stains and facilitates every-day maintenance.
Lithofin MN Stain Stop ECO penetrates into absorbent natural stone surfaces and coats the capillaries with an extremely thin and invisible film of polymers. The treatment prevents the immediate penetration of water based dirt as well as oil and grease, and it provides an effective protection against staining. It does not alter a stone’s sensitivity to acids.
Treatment is recommended for all stone surfaces, such as: floors in kitchen, dining and living areas. The surfaces can be polished, honed, or rough. Durability: approx. four years depending on the type and use of the treated material and maintenance regime.
Lithofin MN Stain Stop ECO can be used as initial protection before grouting and as a pre-treatment. Suitable for indoor and outdoor use. It can be used on all absorbent natural stones, and is especially suitable for rough and honed limestone (e.g. Mocca Creme, Cabouca and similar materials).
Please Note: on siliceous stones with a rough surface (such as honed or flamed granite), dense limestone and in cases where the highest level of water repellency is required (eg. in the shower) we recommend using MN Stain Stop (solvent based). This also applies to surfaces that have been pre-treated with other impregnators or resins.
Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 8
Appearance: clear, yellowish, liquid
Odour: nearly odourless
Flash Point: n.a.
Directions for Use:
Check the suitability and effect with a test in an inconspicuous area or on a spare tile. The surface must be absorbent, completely dry, clean and free of stains. Shake bottle before use. Apply product generously and evenly using a lambswool applicator, roller, lint free cloth or sponge. Ensure even distribution by wiping over several times. Make a second application after approx. two hours. Ensure that all surface residues are removed after 15 mins by towelling them off, do not allow residues to dry on the surface. On highly absorbent surfaces, apply product several times. Do not wait for surface to dry in between these applications. Check the surface for an even finish after the last application. Drying Time: approx. 3 hours.
Application Temperature: The temperature of the surface to be treated should not be under 10°C and not over 25°C. Turn off underfloor heating.
Coverage:
Honed limestone: 4-8m² per litre
Polished natural stone: up to 20m² per litre.
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet