Description
Kerakoll Keraplast Eco P6 Latex Mortar Additive is eco-friendly, water-based latex for mineral mortars and slurry keys. It increases the adhesion of slurry keys and additional casting layers, ensuring the monolithic continuity of mineral mortars and screeds, such as Kerakoll Keracem Eco. It is supplied in 5kg drums.
Kerakoll Keraplast Eco P6 is designed to be used as an additive in mortars and fine-grain concretes and in the preparation of slurry keys for:
- Mineral screeds
- Restoration or reconstruction of concrete on beams, pillars, balconies and cornices
- Casting layers in concrete
- High-adherence plasters with high chemical and mechanical resistance
- Flexible cement finishing
- Cement-based rendering and patching
This product is for internal and external use as an additive for traditional cement-based mortars, finegrain concrete, standard concrete and adhesive slurries. Do not use as a primer in additional casting layers on cement-based substrates when undiluted or diluted with water.
Application:
Preparation of substrates: Slurries and mortars containing Kerakoll Keraplast Eco P6 must be applied to cured surfaces that are clean, solid and free from oil, grease and efflorescences. Residual traces of parting compounds should be removed. It is always advisable to dampen the substrate before application.
Preparation and mixing: Mix Kerakoll Keraplast Eco P6 and the water in advance in the desired ratio and then add the cement and sand. Mix carefully to prevent the formation of lumps. The recommended mixing ratios are as follows: – adhesive slurries: 1 part Keraplast Eco P6, 1 part water, 2.5 parts cement. – cement-based mortars with additives: 1 part Keraplast Eco P6, 2.5 parts water, 5 parts cement, 10 parts sand. The dosages for mortar composition may vary according to use. The dosage of Kerakoll Keraplast Eco P6 must be between a minimum of 10% and a maximum of 30% of the weight of the cement.
Application:
– Cement-based mortars with additives for the reconstruction of concrete on columns, beams, balconies and cornices: dampen the substrate and apply a rough coat of adhesive slurry using a hard brush. While it is still fresh, carry out the reconstruction with the cement-based mortar with additives.
– Anti-debonding and high-performance plasters: dampen the substrate and manually apply an adhesive first coat, leaving the surface as rough as possible. When the first coat has hardened, apply the layer of plaster using cement-based mortar with additives.
– Slurry keys for concrete construction joints: dampen the substrate and apply a coat of adhesive slurry, followed immediately by the concrete casting while the previous coat is still fresh.
Technical Data:
Appearance: white liquid
Specific weight: ≈ 1.01 kg/dm3
Shelf life: ≈ 12 months from production in the original sealed packaging
Warning: protect from frost, avoid direct exposure to sunlight and sources of heat
Pack: 25 / 5 / 1 kg cans
Viscosity: ≈ 1800 mPa · s, rotor 2 RPM 20 Brookfield method
pH: ≈ 9
Recommended ratios for:
– concrete ≈ 10 – 30% of the weight of cement
– mortar ≈ 10 – 30% of the weight of cement
– slurry key ≈ 1 Kerakoll Keraplast Eco P6 : 1 water : 2.5 cement
Temperature range for application: from +5 °C to +35 °C
Click here to view this product on the manufacturers website.
