Everbuild Roll and Stroll Hard Surface Protector

Description

Everbuild Roll and Stroll Hard Surface Protector is the ultimate self adhesive hard surface protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work.

Everbuild Roll and Stroll Hard Surface Protector measures 600mm in width and is available in 25 or 75 metre length rolls.

Everbuild Roll and Stroll Hard Surface Protector is ideal for protecting most hard surfaces including timber, ceramic tiles, laminate, vinyl, metal and stone. It can also be used to protect worktops, window cills, doors, kitchen units and glass. It is totally waterproof and protects against expensive to clean paint spillages on hard surfaces.

Due to the adhesive face being reverse wound, this protector easily unwinds with minimum effort and no need to bend down.

Benefits:

• Easy roll out with no specialist applicator equipment required.
• Will not creep and wrinkle after application. Stays where it is put!
• Totally waterproof.
• Protects against expensive to clean spillages from paints, varnishes etc.
• Easily removed, will not leave a sticky residue.
• Can be left for up to 4 weeks *.
• Adheres to most common hard surfaces.
• Safer than dust sheets.

Limitations:

• Everbuild Roll and Stroll Hard Surface Protector is for application to hard surfaces, DO NOT use on carpets. Use Everbuild Roll and Stroll Carpet Protector.
• Obviously, adhesion will be reduced on dusty surfaces. Vacuuming or mopping prior to use is recommended.
• The protector must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
• Always check Everbuild Roll and Stroll Hard Surface Protector is stuck firmly to surfaces before commencing work.
• On some surfaces Everbuild Roll and Stroll Hard Surface Protector may leave a residue, this can be easily removed using Everbuild Wonder Wipes or hard surface cleaner. A test area is always recommended prior to full application. Please note when cleaning laminate flooring do not used excess water. Always check compatibility of cleaning agent with sub floor prior to full application.
• In heavily trafficked areas or where air temperature exceeds 22°c, remove the protector after 1 week maximum. Do not use underfloor heating whilst product is in situ.
• Do not use on surfaces which bleed oils or plasticizers.
• Product may become slippery when wet. Mop up any spills immediately or replace the protector where necessary.
• It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.

Storage:
Store in cool dry conditions between 5 and 25°C. Safe in normal use however as a precaution keep polythene outer packaging away from children.

Click here to view this product on the manufacturers website.