Description
The wedi Fundo RioLigno range of shower trays are pre-formed trays that feature a linear drainage channel that allows the shower water to drain away to the side in a narrow line. The required slope gradient is already incorporated into the tray.
The wedi Fundo RioLigno Shower Tray is designed especially for suspended timber floors. The concept is the same as the existing wedi Fundo Ligno shower tray, that has been established on the market for many years. It offers a flush-to-floor solution with elegant linear drainage for timber floors. With it’s outer edge of just 25 mm, the wedi Fundo RioLigno shower element fits wonderfully into the existing wooden surface layer without cutting into floor joists or building up further height.
Constructed from the same materials as the wedi Tile Backer Board, each tray consists of a blue core made from extruded polystyrene rigid foam that is reinforced with glass fibre (with alkali-resistant finish) on both sides and coated with a polymer-modified cement. This core is 100% waterproof and remains fully functional even after possible damage.
Each tray has pre-formed surface sloping falls that, when tiled, guide water towards the drainage point of the tray. The drainage trap area at the end of each tray is increased in thickness to 50mm on the underside for strengthening. When installing the tray, a section is to be created between joists underneath the area where the drain outlet is located, to support the concrete mixture that surrounds the drainage trap kit. Alternatively the wedi Fundo Channel Drain Substructure element can be used instead of concrete. This is a specially designed pre-formed foam element that guarantees reliable support and accurate alignment of the drain kit used. Click here to view the installation guidelines.
The wedi Fundo RioLigno Shower Tray options: (click each size to view the complete dimensions)
075100200 – 900 x 900 x 25mm, 700mm Channel Drain
075100201 – 1200 x 900 x 25mm, 700mm Channel Drain
075100202 – 1200 x 1200 x 25mm, 900mm Channel Drain
075100203 – 1600 x 1000 x 25mm, 800mm Channel Drain
wedi Fundo RioLigno Shower Trays are designed to be used only with the wedi Fundo Channel Drain Kits – these are available in 3 different configurations. To complete your shower tray installation, you will also need to purchase a wedi Fundo Channel Cover, available in 3 different variations and all drain length sizes.
When fitting a wedi Fundo RioLigno Shower Tray, use wedi Sealing Tape, Corners & Sealing Gaskets along with wedi 520 Waterproofing Membrane and wedi 610 Adhesive to fully waterproof the installation and seal joints between board connections and internal and external corner junctions. We recommend using the wedi Fundo Sealing Set – this complete set contains wedi 520, sealing tape and 2 internal corners for waterproofing up to 10 metres of joints in a shower installation.
Technical Data:
Material: XPS
Long-term compressive stress (50 years) ≤ 2 % compression EN 1606: 0,08 N/mm2
Compressive strength at 10 % compression EN 826: 0,25 N/mm2
Thermal conductivity EN 13164: 0,036 W/mK
Gross density EN 1602: 32 kg/m3
Temperature limits: -50°C / +75°C
Reaction to fire EN 13501-1: E
Watertightness tested at: 1,5 bar
Click here to view this product on the Manufacturers website.
Reviews
There are no reviews yet