The wedi Fundo Plano Linea range of shower trays are pre-formed trays that feature an integrated linear drain with a horizontal outlet within the structure of the tray itself, to facilitate installation. The required slope gradient is already incorporated into the tray.
The wedi Fundo Plano Linea shower tray comes with a standard brushed stainless steel Channel Cover as standard, there are other designs also available to purchase separately – 3 different variations and all drain length sizes.
Constructed from the same materials as the wedi Tile Backer Board, the wedi Fundo Plano Linea tray consists of a blue core made from extruded polystyrene rigid foam that is reinforced with glass fibre (with alkali-resistant finish) on both sides and coated with a polymer-modified cement. This core is 100% waterproof and remains fully functional even after possible damage.
With a total height of 70mm, the wedi Fundo Plano Linea Shower Tray is the thinnest wedi floor-level shower system and is designed for renovation projects where often, every millimetre counts.
The wedi Fundo Plano Linea Shower Tray is available in a range of sizes, with either a long or short length drain that is situated next to the edge of the tray – click the link to view the technical drawing for each tray:
wedi Fundo Plano Linea Shower Tray Options:
073736600 – 1200 x 800 x 70mm with 700mm Channel
073736601 – 1200 x 900 x 70mm with 800mm Channel
073736602 – 1200 x 1000 x 70mm with 900mm Channel
073736603 – 900 x 900 x 70mm with 800mm Channel
073736607 – 1200 x 900 x 70mm with 300mm Channel
073736608 – 900 x 900 x 70mm with 300mm Channel
When fitting a wedi Fundo Plano Linea Shower Tray, use wedi Sealing Tape, Corners & Sealing Gaskets along with wedi 520 Waterproofing Membrane and 610 Adhesive to fully waterproof the installation and seal joints between board connections and internal and external corner junctions. We recommend using the wedi Fundo Sealing Set – this complete set contains wedi 520, sealing tape and 2 internal corners for waterproofing up to 10 metres of joints in a shower installation.
Long-term compressive stress (50 years) ≤ 2 % compression EN 1606: 0,08 N/mm2
Compressive strength at 10 % compression EN 826: 0,25 N/mm2
Thermal conductivity EN 13164: 0,036 W/mK
Gross density EN 1602: 32 kg/m3
Temperature limits: -50°C / +75°C
Reaction to fire EN 13501-1: E
Watertightness tested at: 1,5 bar
Technical Data – Shower Tray:
Wheelchair load-bearing from minimum tile size: 50 x 50 mm
Glass mosaic from minimum size: 20 x 20 mm
Total installation height incl. integrated drain technology: 70 mm
Surface slope: ≥ 1,19 %
Scope of height-adjustability of Stainless steel coverings: 5–25 mm
Dimensions of steel coverings (depending on the channel length, L x W):
Drain Cover, 300 mm: 288 x 44 mm
Drain Cover, 700 mm: 688 x 44 mm
Drain Cover, 800 mm: 788 x 44 mm
Drain Cover, 900 mm: 888 x 44 mm
Drain capacity: 0,40 l/s; 24,0 l/min