The wedi Fundo Integro range of shower trays are pre-formed trays that feature an integrated drain with a horizontal outlet within the structure of the tray itself, to facilitate installation. The required slope gradient is already incorporated into the tray.
With a total overall installation height of 90mm, the wedi Fundo Integro Shower Tray offers a thin all-in-one floor-level shower system and is designed for renovation projects where often, every millimetre counts.
Each wedi Fundo Integro Shower Tray comes complete with a brushed stainless steel trap cover as standard.
Constructed from the same materials as the wedi Tile Backer Board, each wedi Fundo Integro Shower Tray consists of a blue core made from extruded polystyrene rigid foam that is reinforced with glass fibre (with alkali-resistant finish) on both sides and coated with a polymer-modified cement. This core is 100% waterproof and remains fully functional even after possible damage.
The wedi Fundo Integro Shower Tray is available in a range of sizes, click the link to view the technical drawing for each tray:
wedi Fundo Integro Shower Tray Options:
075900000 – 1200 x 900 x 90mm, Offset Drain
075900001 – 1400 x 900 x 90mm, Offset Drain
075900002 – 1600 x 1000 x 90mm, Offset Drain
075900003 – 1800 x 900 x 90mm, Offset Drain
075900004 – 900 x 900 x 90mm, Central Drain
075900005 – 1200 x 900 x 90mm, Central Drain, Short Side Outlet
075900006 – 1200 x 900 x 90mm, Central Drain, Long Side Outlet
075900007 – 1200 x 1200 x 90mm, Central Drain
075900008 – 1000 x 1000 x 90mm, Central Drain
When fitting a wedi Fundo Integro Shower Tray, use wedi Sealing Tape, Corners & Sealing Gaskets along with wedi 520 Waterproofing Membrane and 610 Adhesive to fully waterproof the installation and seal joints between board connections and internal and external corner junctions. We recommend using the wedi Fundo Sealing Set – this complete set contains wedi 520, sealing tape and 2 internal corners for waterproofing up to 10 metres of joints in a shower installation.
Long-term compressive stress (50 years) ≤ 2 % compression EN 1606: 0,08 N/mm2
Compressive strength at 10 % compression EN 826: 0,25 N/mm2
Thermal conductivity EN 13164: 0,036 W/mK
Gross density EN 1602: 32 kg/m3
Temperature limits: -50°C / +75°C
Reaction to fire EN 13501-1: E
Watertightness tested at: 1,5 bar
Technical Data – Shower Tray:
Wheelchair load-bearing from minimum tile size: 50 x 50 mm
Glass mosaic (thickness: 3 mm) from minimum size: 20 x 20 mm
Minimum installation height: 90 mm
Technical Data – Integrated Drain:
Frame for the stainless steel grid (included with the tray): 120 x 120 x 4 mm
Stainless steel grid V2 A: 115 x 115 x 2.5 mm
Levelling frame: ø 115 x 40 mm
Drain performance DIN EN 1253-1: 48 l/min; 0,8 l/s
Connection pipe (ABS): DN 50
Drain capacity in accordance with DIN EN 1253-1: 50 mm
Slope connection piece: 1.5 %