Description
The UltraTile ProDeck Shower Tray Wet Room Kit is a complete wet room system that is comprised of a UltraTile ProDeck shower tray, drain trap kit and a waterproofing kit.
The UltraTile ProDeck Shower Tray is a blue coloured self-supporting shower tray with a pre-formed minimum fall of 2% that can be used with tiles, resin, vinyl and micro-cement floor coverings. Measuring 22mm at the outer edges, the UltraTile ProDeck Shower Tray allows barrier-free installation with most timber and cement board substrates, it is self-supporting and can span joists with a load baring capacity of 470kg.
The UltraTile ProDeck Shower Tray is manufactured using a resin gel and reinforced fibre glass process and includes 50% recycled materials, allowing for it to be fully recycled after use, which makes it perfect for environmental projects. It can be trimmed to size using a diamond saw.
The UltraTile ProDeck Shower Tray is available in the following sizes:
- 900 x 900 x 22mm
- 1000 x 1000 x 22mm
- 1200 x 800 x 22mm
- 1200 x 900 x 22mm
- 1200 x 1200 x 22mm
- 1300 x 800 x 22mm
- 1450 x 1150 x 22mm
- 1135 x 770 x 22mm
- 1400 x 900 x 22mm
- 1650 x 900 x 22mm
- 1500 x 800 x 22mm
- 1800 x 800 x 22mm
Use the size guide above which shows the drain outlet location of each tray size.
This tray features a square drain and is supplied complete with a drain trap that has a flow rate of 47 litres per minute. It is a two-part design for easy installation, and features a removable mechanical water trap which prevents foul air from escaping from the drain. It features a 40mm solvent weld connection.
Each kit is supplied with a 155 x 155mm stainless steel grating as standard. A tile-in grating and a selection of other finish options are also available to purchase separately:
- Tile In, 130mm x 130mm
- Brushed Brass, 155mm x 155mm
- Copper, 155mm x 155mm
- Bronze, 155mm x 155mm
- Black, 155mm x 155mm
The UltraTile ProDeck Shower Tray Wet Room Kit is supplied with the the UltraTile ProShield Waterproof Tanking Kit, which covers 8m² and is comprised of:
- ProShield Tanking Membrane Tub
- 2 x Internal sealing corners
- 10m sealing tape
- 2 x pipe sealing collars
- Paint brush for applying membrane
For installation instructions, refer to the installation guide linked below.
Click here to view this product on the Manufacturers website.







Reviews
There are no reviews yet