UltraFloor Level IT Pro30 Levelling Compound

Description

UltraFloor Level IT Pro30 is a high performance, high tolerance, free-flowing, rapid setting and drying two-part smoothing underlayment. It consists of a powdered component incorporating a blend of high specification cements, graded fillers and additives with a pre-gauged liquid component, which combine to produce a highly polymerised self-levelling underlayment (SLU). UltraFloor Level IT Pro30 is suitable for depths between 2-15mm.

UltraFloor Level IT Pro30 is supplied as a two part unit, consisting of a 20kg bag of powder and a 4.6 litre bottle of additive. Whole pallet rates (48 units) are also available.

Specifically designed for use over a wide variety of subfloors including: concrete, sand and cement, calcium sulphate/anhydrite/hemihydrate screeds, existing cementitious underlayments, damp proof membranes, surface electrical radiant heating systems, flooring grade plywood, rigid steel, flooring grade asphalt, porcelain, ceramic, quarry or terrazzo floors, and moisture tolerant adhesive residues. Decorative floor coverings can be bonded to internal subfloors in as little as 90 minutes after the application of UltraFloor Level IT Pro30. The protein free formulation means it is ideal for use in biologically sensitive areas. A moisture tolerant formulation makes it suitable for the pre-smoothing of floors prior to the application of surface damp proof membranes (DPM) and moisture vapour suppressants (MVS). Due to its excellent adhesion characteristics, UltraFloor Level IT Pro30 can be used on most common substrates without the need to prime.

Key Features:

• UltraFloor Level IT Pro30 can receive foot traffic in as little as 30 minutes.
• The product is ready to receive unbonded floor coverings after 45 minutes and bonded floor coverings after 90 minutes.
• Can be used over most common subfloors, including old adhesive residues.
• UFH compatible.
• Moisture tolerant.
• Low odour.
• Protein free.

For in-depth details on application, priming and approximate coverage, please see the technical datasheet linked below.

Technical Data:
Specification: BS EN 13813: 2002
Screed Classification: CT-C16-F4
Working time at 20°C: 10-15 minutes
Walk on hardness time at 20°C: 30 minutes
Ready to receive floor coverings: Unbonded: 45 minutes, Bonded: 90 minutes
Compressive Strengths (BS EN 13892-2) 1 Day: >11.0N/mm2 7 Days: >14.0N/mm2 28 Days: >16.0N/mm2
Flexural Strengths (BS EN 13892-2) 1 Day: >3.0N/mm2 7 Days: >3.5N/mm2 28 Days: >4.0N/mm2
Packaging 20kg bag / 4.6 litre bottle

Product Datasheet

Click here to view this product on the manufacturers website.