Ultra Tile Fix ProRapid RS is a single part, rapid setting, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility for use with ceramic, porcelain and natural stone tiles.
Ultra Tile Fix ProRapid RS Tile Adhesive is available in white or grey, in 20kg bags.
Ultra Tile Fix ProRapid RS is a polymer modified adhesive suitable for use with most common substrates. It is able to take light foot traffic within 3 hours of installation depending upon temperature and substrate.
It is suitable for general wall and floor tiling installations, internally and externally. Ultra Tile Fix ProRapid RS is also suitable for use in wet rooms, showers, swimming pools, conservatories and also with electric or water underfloor heating installations.
Ultra Tile Fix ProRapid RS is ideal for use with ceramic tiles, porcelain tiles, mosaics, marble, travertine, granite, limestone, terracotta, quarry and slate tiles. It is not suitable for glass, resin backed, quartz or brick slips.
It is suitable for use on most substrates, such as concrete, sand/cement screed, plywood overlay (15mm min), tile backer boards, cement faced fibre boards, anhydrite/calcium sulphate/gypsum based screeds, existing tiles, firm and stable plaster, plasterboard, sand/cement render and concrete brick/block.
Ultra Tile Fix ProPrimer has been specifically developed to be used as a primer for use with this tile adhesive to provide improved sealing and bonding properties for a variety of substrates.
Apply the adhesive to the required thickness (limits 3mm – 16mm) in areas up to 1m² at a time. For internal walls use a notched trowel to the following notch dimensions to provide solid rib lines:
Mosaic tiles: 3mm x 3mm at 6mm centres
General wall tiles: 5mm x 5mm at 10mm centres
General floor tiles: 8mm x 8mm at 16 mm centres
For floors and external applications we advise to use the solid bed method. This involves applying a uniform bed of adhesive to the floor and “buttering” the back of the tile with the same adhesive. When the tiles are bedded with a twisting action, pressing firmly down it ensures 100% contact is made with both the floor and the tile.
When fitting tiles leave spaces between each of the tiles to allow for grouting (approx: walls 1mm – 3mm and floors 2mm – 12mm). Before the tile adhesive sets clean off the excess adhesive from the face of the tile and grout joints with a clean damp cloth or sponge.
Unit Size: 20kg Bags
Colours: Grey & White
Classification: EN12004 Class C2FT
Bed Thickness: 3mm – 16mm
Grout After*: 4 hours
Coverage: 4.5kg / m² at 3mm Bed Thickness
Pot Life*: 60 Minutes at 20°C
Set Time*: 2.5 Hours at 20°C
Application Temperatures: 5°C to 25°C
*Depending on temperatures, substrate and site conditions.