Phone icon

Tilemaster Standard Set Tile Adhesive

£8.93 (+VAT)

Clear

Description

Tilemaster Standard Set is a standard setting, cement based wall and floor tile adhesive, formulated to give an extended open time for when longer working times are required. Comes in white, in 20kg bags.

Tilemaster Standard Set is suitable for fixing porous tiles such as ceramic, quarry and terracotta tiles to solid substrates such as sand/cement screed, concrete, brick/block and plaster.

Tilemaster Standard Set is primarily used for fixing to solid substrates such as plastered walls, brick, concrete, asphalt/bitumen and power floated concrete and is suitable for use internally and externally.

Tilemaster Standard Set is suitable for use in areas subject to prolonged wet conditions and condensation such as wet rooms and swimming pools, and is unaffected by frost after setting.

Tilemaster Standard Set has been formulated to give an extended bucket life of approximately 3 – 4 hours.

Technical Data:
Standard Conformity: Conforms to BS EN 12004 C1 E
Bed Thickness: 3mm – 12mm
Coverage: 20kg will cover approximately 5 – 6 metre² at 3mm bed application
Open Time/Working Time: Approximately 3 hours at 20°C
Before Grouting: Approximately 24 hours at 20°C. The set time will be increased by lower temperatures and reduced at higher temperatures. * Tiling onto an impervious substrate with a non porous tile will increase the set time.
Storage: Store unopened, clear of the ground in cool, dry conditions and protect from excessive drafts.
Shelf Life: Stored correctly this product has a shelf life of 6 months
Colours: White
Pack Sizes: 20kg

Product Datasheet

Click here to view this product on the Manufacturers website.

Additional information

Weight N/A
Colour:

White, Grey

Option:

Single 20kg Bag