Tilemaster Standard Set Extrabond Tile Adhesive is a polymer modified, cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Formulated to give an extended pot life of approximately 3 – 4 hours, ideal where longer working times are required. Available in grey or white, in 20kg bags. Pallet rates are also available (48 x 20kg bags).
Tilemaster Standard Set Extrabond has been specially formulated for fixing a large variety of tiles including ceramic, porcelain, marble, travertine, limestone, slate, granite, terracotta, mosaics and quarry tiles. Suitable for use with natural stone tiles but suitability with very porous and sensitive natural stone tiles must be tested prior to use.
Tilemaster Standard Set Extrabond Tile Adhesive is suitable for use on solid substrates such as sand/cement screeds, concrete, tile backer boards, plaster, plasterboard, fibre cement sheet, cement/sand render, and concrete brick/block.
When mixed with Tilemaster Flexmaster Additive, Tilemaster Standard Set Extrabond is suitable for fixing to a wider variety of tiles a wider variety of substrates.
Ssuitable for use in areas subject to prolonged wet conditions such as showers and wet rooms. It is suitable for use internally and externally and is unaffected by frost after setting.
Standard Conformity: Conforms to BS EN 12004 C1 TE
Bed Thickness: 3mm – 12mm
Coverage: 20kg will cover approximately 5 – 6 m² at 3mm bed application
Open Time/Working Time: 3 – 4 hours at 20°C
Before Grouting: Approximately 24 hours depending on temperature and substrate. The set time will be increased by lower temperatures and reduced at higher temperatures *Tiling onto an impervious substrate with a non-porous tile will increase set time.
Storage: Store unopened, clear of the ground in cool, dry conditions
Shelf Life: Stored correctly this product has a shelf life of 6 months
Colours: Grey and White
Pack Size: 20kg