Tilemaster LevelFlex+ DEPTH Levelling Compound is a flexible, fibre reinforced, rapid setting, protein free smoothing and levelling compound, designed for preparing subfloors prior to the installation of floor coverings. Tilemaster LevelFlex+ DEPTH has been developed to allow the product to be applied from depths of 2mm – 85mm in one application without the need for additional aggregate, whilst still allowing, due to its rapid setting and drying properties, ceramic, porcelain and natural stone tiles to be fitted from as little as 2.5 hours.
Tilemaster LevelFlex+ DEPTH Levelling Compound can be used on a large variety of substrates, including sand & cement screeds, concrete, timber, flooring grade asphalt/bitumen and existing ceramic, porcelain and natural stone tiles.
Tilemaster LevelFlex+ DEPTH Levelling Compound can also can be used on underfloor heated screeds, retro fit overlay underfloor heating systems and is ideal for encapsulating electric underfloor heating elements.
In ideal conditions, Tilemaster LevelFlex+ DEPTH Levelling Compound will be set to walk on after 2.5 hours. Tilemaster LevelFlex+ DEPTH must be left to dry before applying the final surface flooring. This is typically after 2.5 hours for ceramic, porcelain and natural stone tiles. Thicker applications may require a longer time to dry prior to applying floor coverings. If there is no airflow within site conditions, the drying time may be restricted.
- Apply From 2mm – 85mm In One Application
- Rapid Setting, Walk On After 2.5 Hours
- Tile On After 2.5 Hours
- Suitable For Use Above Underfloor
- Heating Systems
- Suitable As A Wearing Surface
- Moisture Tolerant
- Protein Free
20kg will cover 4.5m² at 3mm thickness.
For mixing and application instructions, please refer to the manufacturers data sheet linked below.
Screed classification: CT-C30-F7 to BS EN 13813; 2002
Working time @ 23°C: 25 – 35 minutes
Time to foot traffic @ 20°C: 2.5 hours
Application thickness: 2mm – 85mm
Compressive strength: 1 day > 10.0 N/mm2 (BS EN 13892-2), 7 day > 15.0, 28 day > 30.0
Flexural strength: 1 day > 3.0 N/mm2 (BS EN 13892-2), 7 day > 5.0, 28 day > 7.0
Coverage 20kg will cover 4.5m2 at 3mm thickness
Flow properties using 30mm x 50mm flow ring: 135mm – 145mm
Minimum application temperature: 5°C
Pack size: 20kg