Tilemaster Flexigrout is a flexible, rapid setting, water resistant, cement based powder grout which has been developed for grouting floor tiles fixed to substrates with limited movement or vibration such as underfloor heating, plywood and chipboard. Polymer has been added to the formulation to increase flexibility, adhesion and water resistance.
Tilemaster Flexigrout is available in Grey, Ivory & Limestone colours, and comes in 10kg bags.
Tilemaster Flexigrout is designed for joint widths between 3mm and 15mm and is suitable for use internally and externally.
Tilemaster Flexigrout is suitable for grouting a large variety of tiles: Ceramics, Porcelain, Marble, Travertine, Limestone, Slate, Quartz, Granite, Composite, Terracotta, Mosaics and Quarry tiles.
Tilemaster Flexigrout can be used on a wide range of substrates: Sand/Cement Screed, Concrete, Plywood Overlay (12mm min), Electric Underfloor Heating, Water/Wet System Underfloor Heating, Tile Backer Boards, Anhydrite Screeds, Plaster, Plasterboard, Fibre Cement Sheet, Cement/Sand Render, Concrete Brick/Block, and Green Screeds.
When mixed with Tilemaster Flexmaster Additive, the flexural properties of Tilemaster Flexigrout are enhanced, making it suitable for a wider range of substrates, such as T & G floorboards, floating floors, steel and fibreglass.
Tilemaster Flexigrout is suitable for areas subject to prolonged wet conditions such as swimming pools and wet rooms and is unaffected by frost when set.
Standard Conformity: Conforms to BS EN 13888 CG2
Joint Width: 3mm – 15mm
Open Time/Working Time: Approximately 45 – 60 minutes at 20°C
Set Time: 24 hours
Application Temperature: 5°C – 30°C
Storage: Store unopened, clear of the ground in cool, dry conditions and protect from excessive drafts.
Shelf Life: Stored correctly this product has a shelf life of 6 months
Colours: Grey, Ivory, Limestone
Pack Sizes: 10kg
Note: All work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385