Tilemaster Feather is a rapid drying, fast setting, ultra-fine, high polymer patch-repair and smoothing compound developed for internal use on a large variety of substrates prior to the installation of a final floor covering.
Tilemaster Feather has been developed to further improve subfloors prior to the installation of a new floor covering such as decorative vinyl, linoleum, laminate and ceramic, porcelain and natural stone tiles.
Tilemaster Feather has outstanding adhesion properties and it is suitable for use on a wide variety of substrates without the need to prime.
Tilemaster Feather can be used on: Sand/Cement Screed, Concrete, Plywood Overlay (12mm min), Electric Underfloor Heating, Water/Wet System Underfloor Heating, Tile Backer Boards, Anhydrite Screeds, Plaster, Plasterboard, Fibre Cement Sheet, Cement/Sand Render, Concrete Brick/Block, T&G Floorboards, and Floating Floors.
Tilemaster Feather has been developed to further improve the surface finish of substrates prior to laying final floor coverings and it is ideal for patching and feathering depressions, trowel marks, ridges, gouges and day-work joints in the sub-floor, as well as for smoothing over screw-heads and joints between sheets of plywood.
Tilemaster Feather is a genuine “feather edge” product allowing for applications between 0 and 3mm. The mortar has an open time of approximately 15 minutes at 20°C and when skimmed on absorbent sub-floors will normally be hard enough for floor laying after as little as 15 minutes.
Standard Conformity: Conforms to BS EN 13813 CT-C12-F5
Application thickness: 0 – 3 mm
Open Time/Working Time: Approximately 15 minutes at 20°C
Coverage: When mixed with 6 litres of water and applied as a scrape coat, an 11kg bag of Tilemaster Feather will cover approximately 50m2 (approximately 10m2 at a 1mm depth)
Storage: Store unopened, clear of the ground in cool, dry conditions
Shelf life: Stored correctly this product has a shelf life of 6 months
Pack size: 11 kg