Phone icon

Schluter KERDI FIX Adhesive

(1 customer review)

£16.08 (inc VAT)

Quantity:

Description

Schluter KERDI FIX Adhesive is an elastic installation adhesive made of an MS polymer. It is suitable for creating tight seals at the transition between bonded waterproofing assemblies made with Schluter KERDI 200 Membrane and other construction elements such as balcony and terrace doors, window components, metal ducts or Schluter BARA edge profiles.

Schluter KERDI FIX Adhesive comes in 290ml tubes, in either grey or brilliant white colour.

Furthermore, Schluter KERDI FIX Adhesive is ideally suited for joining Schluter KERDI BOARD panels or for adhering them to construction fixtures. It can also be used for adhering other materials.

Schluter KERDI FIX is odourless, resistant to UV radiation and weather influences and is therefore especially suitable for use in outdoor areas. The adhesive is elastic, free of solvents and has good adhesion to most materials such as wood, stone, concrete, metal, glass and many synthetic materials.

Schluter KERDI FIX can be used as an adhesive and waterproofing compound and is also suitable for connection joints and expansion joints. It can be painted over with most dispersion paints. The suitability of the material must be verified based on the anticipated chemical, mechanical and/or other stresses.

Installation:
1. The substrate may be slightly moist but must be free of components that may impede adhesion. In addition, it should be sufficiently solid and able to bear weight.
2. Apply Schluter KERDI FIX to the substrate. To attach Schluter KERDI 200 Membrane, spread the installation adhesive evenly with a small notched trowel.
3. Adhere the construction material as quickly as possible over the whole area, making sure to avoid the formation of air bubbles.
4. When installing Schluter KERDI 200 Membrane it is recommended to run the smooth side of the notched trowel over the mat at an angle under pressure or to use a suitable pressure roller to carefully avoid air bubbles.

Technical Data:
Colour: grey/brilliant white
Basic raw material: silyl modified polymer (SMP)
Curing system: by air humidity
Specific weight: approximately 1.5 g/ml
Solvent content: 0%
Isocyanate content: 0%
Dry materials content: approximately 100%
Shear strength beech wood/beech wood: approximately 3 N/mm2
Sheer strength aluminium/aluminium: approximately 2 N/mm2
Elongation at failure: approximately 200%
Skinning: after approx. 10 minutes
Curing (+23°C/50% rel. humidity): 3 mm per 24 hours
Permissible total movement: approximately 20%
Processing temperatures: do not use at temperatures below +5 ºC
Temperature stability: -40 ºC to + 110 ºC
Moisture resistance: very good
Frost ability: not sensitive to frost
Cartridge: 420 g (290 ml)

Product Datasheet

Click here to view this product on the Manufacturers website.

Additional information

Weight N/A
Colour

Grey, Brilliant White

1 review for Schluter KERDI FIX Adhesive

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. Bit expensive but don’t mind paying for quality product to go with the excellent Schluter shower tray, Schluter Kerdi board and drain etc that I am installing for myself.

Add a review
You must be logged in to post a review Log In