Phone icon

Mira 4400 Multicoat

£44.40£91.20 (inc VAT)

Mira 4400 Multicoat is a flexible, polymer based membrane paste used for tanking floor and wall substrates in wet rooms and bathrooms.

Clear
SKU: N/A Category:

Description

Mira 4400 Multicoat

Mira 4400 Multicoat is a flexible, polymer based membrane paste used for tanking floor and wall substrates in wet rooms and bathrooms.

Mira 4400 Multicoat comes ready to use, and is easily applied using a roller or brush.

Suitable for use on concrete, aerated concrete, wood, gypsum and floor screeds. Only suitable for use indoors with wet rooms and bathrooms.

Preparation

The substrate must be dry, compact, cleaned of dust, grease, oil etc. Concrete slurry (if any) should be removed, weaker parts of substrate should be removed and then repaired again. Remove dust with a vacuum cleaner. Grease, oil, dirt should be cleaned. The entire surface should be clean of dust.

Absorptive substrates should be primed with Mira 4180 Primer, thinned with water in the ratio: 1 part of 4180 sealer and 3 parts of water. Non-absorptive substrates e.g. painted or made of ceramic tiles shall not be primed. When the surface is dry Mira 4400 Multicoat can be applied.

Mixing

Mira 4400 Multicoat is ready-to-use and must not be diluted. Slowly stir the slurry before use.

Application

Spread the slurry with a brush, roller or a trowel. First protect corners, wall and floor joints between panels or elements by covering them with two layers of MIra 4400 Multicoat and Mira Safecoat roll.
Inlets and water outlets should be protected with special flanges of safe coat called seal manchets. On the walls 2 layers of 4400 multicoat should be laid, without Mira Safecoat. The second layer should be spread when the first has been drying for 1-2 hours.
On floors 2 layers of Mira 4400 Multicoat should be applied, with Mira Safecoat as a carrying layer.
Floor insulation should be done during one working cycle. The Mira Safecoat mat should be covered completely with the second layer of Mira 4400 Multicoat to reach the minimum thickness of 1.5 mm.

Temperature/weather condition

Minimum air and substrate temperature +6°C When applied outdoor (terraces, balconies), protect from intensive sunlight and rain.

Hardening time

The membrane takes approx. 12 hrs to fully dry in temperatures of 10-15°C.

Click here to view this product on the manufacturers website.

Additional information

Weight N/A
Size

6 KG, 15 KG

You may also like…