Phone icon

Mapesil AC SC Silicone Sealant 310ml

£15.94 (inc VAT)£13.28 (ex VAT)

Quantity:

Description

Mapesil AC SC Silicone is an acetic-curing silicone sealant suitable for sealing glass, ceramic, and anodised aluminium. After first having used a bonding enhancer, Mapesil AC-SC can also be used on concrete, wood, metal, painted surfaces, plastic and rubber.

Mapesil AC SC Silicone is a one-component, acetic curing, solvent-free silicone sealant, available in 7 colours: 299 Limestone, 316 White Sand, 317 Pebble, 318 Oyster, 319 Sand Storm, 320 Soft Stone, 321 Pearl. Please note: These colours are no longer available from Mapei in any of their tile grout ranges.

It is a thixotropic paste which is easily trowellable both horizontally and vertically with excellent durability. Seals remain unchanged even after many years exposure to climatic extremes, industrial pollution, sudden temperature changes and immersion in water; It cures following exposure to atmospheric humidity at ambient temperatures, and forms an elastic product with following properties:

  • high elasticity;
  • excellent bonding to glass, ceramic and anodised aluminium;
  • mildew resistant;
  • waterproof and permeable to vapour;
  • resistant to chemical agents;
  • flexible down to -40°C and resistant to temperatures at +180°C;
  • easily workable;
  • in compliance with ISO 11600 norm, it is classified as F-25-LM;
  • in compliance with EN 15651-1, EN 15651-2, EN 15651-3 and CE-marking.

Mapesil AC SC Silicone is used for:

  • Sealing expansion joints of ± 25% expansion of the initial size, according to the standard EN 15651.
  • Forming a perfectly elastic gasket between different elements in the building, mechanical engineering, shipbuilding, automobile, manufacturing, etc.

Some application examples:

  • Sealing joints in wall and floor coverings of ceramic and cement, provided they are not subject to heavy abrasion.
  • Sealing joints between sinks or sanitary ware and ceramic tiles in kitchens, bathrooms and showers with colours coordinated with the grouts.
  • Sealing expansion joints in swimming pools.
  • Assembling compositions of glass tiles and artistic stained glass windows.
  • Sealing glazing, door, and window frames portholes, windows, and glass.
  • Sealing air ducts, and water pipes.
  • Sealing tanks, service pipes, and boilers.
  • Sealing of joints subject to high chemical and thermal stress.
  • Sealing materials of different thermal exposure coefficients.

Recommendations:

  • Do not use Mapesil AC SC Silicone for joints in exterior between ceramic tiles and light-coloured natural stone because dirt could accumulate by the joints. In such cases, please contact Mapei Technical Service to identify the most suitable solution.
  • For sealing surfaces sensitive to acids such as limestone, use a neutral silicone sealant (e.g. Mapei Mapesil LM).
  • The use of Mapesil AC SC Silicone is not recommended on highly plasticised material or on bituminous surfaces because of the release of substances that reduce bonding and penetrate into the sealant, altering the colour and resistance.
  • The resistance of Mapesil AC SC Silicone to chemical agents is generally excellent; however, due to the numerous products and working conditions to which Mapesil AC SC can be applied, it is always advisable to do a sample test in cases of doubt.
  • Do not use Mapesil AC SC Silicone to seal aquariums.
  • For sealing floor joints subject to heavy traffic, use a polyurethane (e.g. Mapeflex PU 45 FT) or epoxypolyurethane (e.g. Mapeflex E-PU 21 SL) sealant.
  • Where Mapesil AC SC Silicone is to be applied in areas of continuous immersion, i.e. inside a swimming pool tank, the joints must be primed using Primer FD.

Application:

Preparing and calculating joints size:
All the surfaces to receive the sealant must be dry, solid, and free from dust and loose particles, oils, grease, wax, old paint, and rust.
In order that the seal can carry out its function, provision must be made for it to elongate and compress freely.
During application, it is, therefore, necessary that:

  • it adheres only to the side of the walls of the joint and not to the base of the joint;
  • the joint is sized so that the estimated maximum extension is not greater than 25% of the initial width (calculated at +20°C);
  • when the width of the joint is 10 mm, the thickness must be equal to the width; for widths between 11 and 20 mm the thickness must always be equal to 10 mm; for widths greater than the thickness must be equal to half the width.

To control the depth of the joint and to prevent Mapesil AC SC Silicone from adhering to the base, the bottom of the joint should be filled with an appropriately sized Mapefoam, a polyethylene cord.

Application of Primer FD:
Where the use of Primer FD is necessary, it must be applied with a small brush onto the appropriate areas of the joints and left to dry for several minutes to allow the solvent to evaporate. Then apply Mapesil AC SC Silicone.

Application of Mapesil AC SC Silicone:
Mapesil AC SC Silicone is packed in cartridges of 310 ml; to use, cut the cartridge above the end of the thread and screw on the nozzle, which should be cut at 45° to produce a hole corresponding to the size of the joint. Insert the cartridge into the gun and extrude the sealant.

The surface of Mapesil AC SC Silicone must be finished off with a tool moistened with Mapei Ultracare Smooth Silicone Spray before a superficial film has formed.

Curing:
When exposed to air and humidity, Mapesil AC SC Silicone crosslinks and becomes elastic. The speed at which Mapesil AC SC Silicone crosslinks depends only slightly on temperature, but is fundamentally linked to humidity in the atmosphere.

Consumption:

Consumption of Mapesil AC SC Silicone varies depending on the width of the joints. Some examples of consumption for end joints and triangular joints are shown in the chart on the product datasheet linked below.

Technical Data:
Type: thixotropic paste
Colour: 7 colours
Density: 1.03 g/cm³
EMICODE: EC1 Plus – very low emission
Application temperature range: from +5°C to +35°C
Extrusion rate according to ISO 8394-1: 120 g/minute
Time for formation of skin: 10 minutes
Shrinkage during vulcanisation: 5%
Speed of vulcanisation: 2.5-3.0 mm/24 h
EN 15651-1: sealant for façade joints in interior and exterior, even with cold temperature: F-EXT-INT-CC
Class: 25 LM
EN 15651-2: sealant for glazing, even with cold temperature: G-CC
Class: 25 LM
EN 15651-3: sealant for sanitary fittings: S
Class: XS 1
Tensile strength – according to ISO 37: 1.8 N/mm²
Elongation at breaking point – according to ISO 37: 900%
Shore-A-Hardness (ISO 868): 20
Density at +25°C (ISO 1183-1 A): 1.02 g/cm³ Modulus of elongation measured according to ISO 37-3: – at 100% elongation: 0.30 N/mm²
Maximum movement allowed: 25%
Resistance to water: excellent
Resistance to ageing: excellent
Resistance to atmospheric agents: excellent
Resistance to chemical agents, acids and dilute alkali: good
Resistance to soap and detergents: excellent
Resistance to solvents: limited
Resistance to temperature: from –40°C to +180°C

Product Datasheet

Click here to view this product on the Manufacturers website.

Additional information

Weight N/A
Colour

299 Limestone, 316 White Sand, 317 Pebble, 318 Oyster, 319 Sand Storm, 320 Soft Stone, 321 Pearl