Mapei Ultraplan Renovation Screed 3240 is a fibre reinforced self levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications, it can be hand or pump applied. It comes in 25kg bags. Pallet Rate is available (40 x 25kg bags) at £12.75 + VAT per bag. This includes Free Delivery.
Mapei Ultraplan Renovation Screed 3240 is used for interior levelling, smoothing and infilling differences in thickness from 3 to 40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floor boards, chipboard panels, plywood, parquet for use in dry locations as an underlayment for floor finishes such as tile, stone, vinyl, carpet and wood flooring.
Mapei Ultraplan Renovation Screed 3240 is suitable where good resistance to loads is required, also for wheelchair traffic and underfloor and undertile heating systems.
Pour a 25 kg bag of Mapei Ultraplan Renovation Screed 3240 into a bucket containing 4.25-4.5 litres of clean water and mix with a low speed electric mixer to obtain an homogeneous, self-levelling, lump free mix.
Larger quantities of Mapei Ultraplan Renovation Screed 3240 can be prepared in suitable mixers. After 2-3 minutes of slackening, the mix should then be restirred and then it is ready for use. The amount of Mapei Ultraplan Renovation Screed 3240 mixed at any time must be used within 20 minutes (at a temperature of +23°C).
Apply in a single coat from 3 to 40 mm in thickness. To minimise aeration a spiked roller may be used. The self levelling properties of Mapei Ultraplan Renovation Screed 3240 will provide a surface ready to accept all kinds of floorcoverings.
Approx 6 m² at 3 mm thickness.
Consistency: fine powder
Specific gravity (kg/m³): 1,300
Dry solid content (%): 100
EMICODE: EC1 R Plus – very low emission
Mixing ratio: 4.25-4.5 litres of water per 25 kg bag
Thickness per coat: 3 to 40 mm
Specific gravity of mix (kg/m³): 2,100
pH of the mix: approx. 12
Application temperature range: from +5°C to +30°C
Open time: 20 minutes
Setting time: 30-90 minutes
Walkable: 4-6 hours
Waiting time before bonding: 1-3 days depending on the thickness