Mapei Ultraplan Eco 3210 Levelling Compound is an ultra-fast hardening self-levelling floor compound with very low VOC (volatile organic compound). Available in 20kg bags.
Mapei Ultraplan Eco 3210 is used for interior levelling and removing differences in thickness from 3 to 10 mm of new or existing substrates, preparing them to receive any kind of flooring where excellent resistance to loads and traffic is needed. Mapei Ultraplan Eco 3210 is particularly suitable for areas subject to wheeled chairs.
For interior use only.
Some application examples:
• Levelling concrete slabs, cement, Mapecem, Mapecem Pronto, Topcem or Topcem Pronto, anhydrite and magnesite based screeds with underfloor heating systems incorporated.
• Levelling existing cement, terrazzo, ceramic and natural stone floors.
Mapei Ultraplan Eco 3210 is a grey powder consisting of special cements with rapid setting and hydration together with graded silica sand, resins and special additives, according to a formula developed in the MAPEI Research and Development Laboratories.
The product becomes a highly fluid and easily workable mortar when mixed with water, which is self-levelling, with high adhesion to the substrate and dries ultra-quickly. Can be applied with an automatic pressure pump for distances over 100m.
Mapei Ultraplan Eco 3210 Levelling Compound can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion.
Ready to receive flooring after approximately 12 hours, regardless of the thickness. It is recommended to wait 24 hours before installing wooden flooring. the VOC content is practically zero, certified by the TFI German Institute, so is harmless to the health of the installer and the end-user.
1.6 kg/m2 per mm of thickness.
Consistency: fine powder
Bulk density (kg/m³): 1300
Dry solids content (%): 100
Mixing ratio: 4.8 to 5 litres of water per 20 kg bag
Thickness per coat: 3 mm to 10 mm
Self levelling: yes
Density of the mix (kg/m³): 2000
pH of mix: approx. 12
Application temperature range: from +5°C to +30°C
Open time: 20-30 minutes
Setting time: 45-60 minutes
Set to light foot traffic: 3 hours
Time before laying flooring: 12 hours (24 hours for wood flooring)