Phone icon

Lithofin Stain Stop PLUS

£21.53£170.56 (inc VAT)

Clear
Quantity:

Description

Lithofin Stain Stop PLUS is an impregantor plus colour intensifier. It is a ready-to-use special product from the LITHOFIN-Range for ceramics, natural and concrete stone.

Lithofin Stain Stop PLUS contains high-quality water and oil repellent agents based on siloxanes and dissolved in solvents. It is similar to MN Stain Stop but differs in that it also contains special additives that permanently intensify the colour structure.

Lithofin Stain Stop PLUS sinks into the stone and reduces the capillary absorbency so water, oil and grease can no longer penetrate the surface. These materials remain on the surface and can be wiped off before they cause stains. In addition to protecting the stone, it darkens it – thereby invigorating the colour structure.

Lithofin Stain Stop PLUS is for making absorbent ceramic, terracotta, natural- and engineered stone surfaces stain resistant and at the same time intensifying their colour structure.

It is highly suitable for weak to medium absorbent natural stones like granite, gneiss, quartzite, slate and limestone with rough to honed surfaces. It is also suitable for polished stones, indoor and outdoor. Please Note: impregnated surfaces cannot be treated. Marble and limestone remain sensitive to acid.

Technical Data:
Density: ca.0.8 g/cm³
Appearance: liquid, colourless
Flash Point: >35°C (c.C)
Odour: aromatic

Coverage:
Depends on the absorbency of the surface.
Approximations:
approx. 10-15m² on honed granite.
approx. 6-8m² on sawn granite.
approx. 25-30m² on slate.

Drying Time:
Most of the solvents evaporate within two hours. Floors can be walked on after 12 hours. The impregnator is fully effective after 24 to 48 hours.

Durability:
Outdoors, the colour intensifying component lasts for one to two years, depending on the type of stone and the weather. The protective component will last for about three years. Indoors, the durability depends on the care products used. Strong degreasing agents and layer forming products are not suitable. For regular maintenance, we recommend MN Wash & Clean which supports the effect of the product.

Click here to view this product on the manufacturers website.

Product Datasheet

Additional information

Weight N/A