Phone icon

Lithofin Resin EX

£44.38 (inc VAT)



Lithofin Resin EX is a special remover based on acidic reaction compounds supported by select, highly active organic solvents. It can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products in many cases.

Lithofin Resin EX penetrates into many organic substances and dirt deposits, dissolving them from the surface. The gel like consistency simplifies the application.

Lithofin Resin EX can be used to remove epoxy grout materials and residues. It is also highly suitable for removing organic substances such as resins, sealants, coatings, oil and grease deposits, paint (graffiti), lacquer, adhesives, plastic residues, etc. Suitable for indoor and outdoor use.

Lithofin Resin EX is suitable for use on all quarry and ceramic tiles, rough natural stones such as granite, gneiss, quartzite as well as concrete and concrete stone.

Technical Data:
Density: approx. 1.1 g/cm³
pH-Value: approx. 3
Appearance: whitish, dimish, gel like
Odour: slightly pungent
Flash Point: >90°C (c.C.)
Solubility in Water: emulsifiable

Directions for Use:
Test the product prior to use. Always apply Lithofin Resin EX to a dry surface. Protect surface from wetness during working time because water represses the effectiveness. Application-/surface temperature: 10 – 30°C. The mentioned working times are shorter at higher temperatures and longer at colder temperatures.

Directions to remove pavement fixing mortar:
Generously apply to the dry surface using a brush or a scrubber. Allow to work for up to approx. 20-30 min. at room temp. of about 20°C. Then add water (best if diluted 1:10 with MN Power Clean and brush. Afterwards, rinse and brush. Always brush diagonally to grouts. Rinse surface again with water. In case of any leftovers, repeat when surface is dry.

Up to approx. 5 m²/L, depending on dirt.

Directions to remove epoxy resin (2K) mortar:
Generously apply to the dry surface using a brush or a roller. Allow to work for approx. 3 hrs at about 20°C. Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately.

Coverage: up to approx. 20 m²/L on glazed tiles.

Cool and closed, shelf life of up to 2 years.

Click here to view this product on the manufacturers website.

Product Datasheet

Additional information

Weight N/A


There are no reviews yet

Add a review
You must be logged in to post a review Log In