Description

Lithofin MULTI SEAL is a special product from the LITHOFIN Range, a water-based product that is ready to use and contains a combination of high-quality natural waxes and additives.

Lithofin MULTI SEAL forms a natural satin sheen protective film, which prevents water, dirt and oil from penetrating into the surface making it easier to maintain. Rough surfaces become scuff resistant, smoother and therefore easier to clean. Surfaces maintain their natural colour, the overall appearance is improved through a satin sheen.

Lithofin MULTI SEAL is for sealing natural stone such as slate, limestone (rough and honed) as well as quarry tiles, concrete stone, concrete slabs and terracotta. Formulated as a finishing treatment after impregnation with MN Stain Stop, KF Stain Stop or any other suitable impregnator.

Lithofin MULTI SEAL is not suitable for outdoor use.

Technical Data:
Density: ca.1.0 g/cm³
pH-Value: 8-9
Appearance: liquid, whitish
Odour: nearly odourless

Directions for Use:
The surface to be treated must be clean and completely dry.

Apply the product undiluted and spread evenly with a brush, roller or sponge. Two to three coats will generally be needed in order to achieve a uniform appearance. Allow one to two hours drying time between coats.

Please Note: Always try the product in an inconspicuous area prior to use. Always treat the entire surface. The surface temperature should be between 5°C and 25°C. Avoid or immediately remove splashes from wood, glass, varnish and other sensitive areas. Do not walk on the surface until it is dry. Clean application equipment with water.

Drying Time: dry after about 4 hours. Resilient after about 24 hours. Completely dry and hard after about 48 hours.

Coverage:
Approx. 7 to 12m² per litre depending on the surface.

Pre-Treatment:
All porous surfaces should be impregnated with the appropriate Lithofin product prior to sealing with Lithofin MULTI SEAL.

Click here to view this product on the manufacturers website.

Product Datasheet