Lithofin MPP Marble Polishing Powder is a special LITHOFIN-Product formulated for the professional user. It is a marble polishing powder based on oxalates and special additives.
Lithofin MPP Marble Polishing Powder transforms calcium particles in the surface of the stone, making them easy to polish. The polish is renewed and the surface once again has a high gloss finish.
Lithofin MPP Marble Polishing Powder is for touching up dull patches and for renewing worn off polishes on marble, travertine and other calcium containing stones such as carrara, thassos, ajax, etc. as well as terrazzo and agglo marble.
Lithofin MPP Marble Polishing Powder is not suitable for granite, quartzite, artificial stone, etc. It is suitable for indoor and outdoor use.
Apparent Density: 0,85 g/cm³
in Water: < 2
Appearance: powder, white
Flash Point: n.a.
Directions for Use:
Preparation: The surface to be treated must be clean and free of polymers, acrylates and wax layers. Use MN Power Clean or WAX OFF to thoroughly clean the surface.
For touching up small surfaces or patches it is possible to polish by hand. This will only lead to a lower level of gloss; it is preferable to use a polishing machine. On smaller surfaces we recommend polishing machines with approx. 1000 rpm. For floors, a one disc polishing machine with approx. 140 to 180 rpm, 40 to 50 kg, pressure of approx. 0,37 N/cm² to 0,52 N/cm² is necessary.
Always use a white nylon polishing pad with the product. Optimal results can be achieved on surfaces with a 300 to 400 polish. Treat larger surfaces in segments of max. 10 to 15m².
Execution: Wet the surface with plenty of water. Spread a small quantity of Lithofin MPP Marble Polishing Powder and immediately start polishing. When the product turns pasty, add some water and continue polishing until the desired gloss level is reached. Then immediately rinse the surface with Lithofin MN Power Clean diluted 1:10 to 1:20 and remove the solution with a wet and dry vac or cloth. Do not allow any product residues to remain on the surface.
Advice: it may be advisable to wet the surface with MN Power Clean rather than with water. This reduces the risk of matt stains due to splashes on already polished surfaces. On small areas, the product can be mixed with MN Power Clean to form a paste, which is easier to use.
Please Note: sensitive surfaces such as wood, parquet, carpets, etc. must be protected against splashes. Some types of stone difficult to polish. Always try Lithofin MPP Marble Polishing Powder in an inconspicuous area prior to use. Deep scratches can not be removed.
Coverage: approx. 30m² per 750g.
Application Temperature: the temperature of the surface should be between 10°C and 25°C. Switch off underfloor heating.
Keep closed and cool. Shelf life of up to five years.