Description
Lithofin MN Flagstone Sealant is a special product from the LITHOFIN-Range for marble, natural and artificial stone (MN). It is a ready-to-use sealant that contains high quality acrylates dissolved in organic solvents.
Lithofin MN Flagstone Sealant forms a shiny protective layer that closes the pores of the stone. Water and dirt can no longer penetrate into the surface and maintenance is facilitated. The water permeability of the stone is reduced significantly.
Lithofin MN Flagstone Sealant produces a “wet look” which makes the colours of the stone become more vibrant. The slip resistance can be affected depending on the type of surface. The protective film is hard wearing, UV-resistant and does not yellow.
Lithofin MN Flagstone Sealant is for sealing rough to honed natural stone surfaces, for producing shine and enhancing the appearance and for facilitating maintenance. It can be used on all porous and absorbent natural stones, such as marble, granite, slate, etc. as well as terrazzo and concrete slabs.
Sealant Technical Data:
Density: approx. 0.9 g/cm³
Flash Point: approx. 25°C (c.C.)
pH-Value: n.a.
Appearance: clear, colourless
Odour: aromatic
Directions for Use:
The surface to be treated must be absorbent, clean and completely dry. Always test the product in an inconspicuous area in order to evaluate the effect. Evenly apply with a clean roller or a large sponge. On very absorbent surfaces, a second coat may be required.
Please Note: non-absorbent, polished or finely honed surfaces cannot be sealed. Protect all solvent sensitive surfaces, such as glass, polished surfaces, wood, lacquered surfaces, plastics, etc. Clean tools with WAX OFF. The product can be removed from the surface with WAX OFF. Important: Lithofin MN Flagstone Sealant is only suitable for surfaces where the penetration of water (from below or the sides) is not possible. Moisture underneath the sealant will lead to white spots or even damage the surface.
Application Temperature: 5 to 25°C. Do not apply in direct sunlight.
Drying Time: dry after approx. 45 minutes, fully cured after approx. 24 hours. Durability: indoors and with adequate care: many years. The product can be reapplied if necessary.
Coverage: up to 10m² per litre on rough limestone, up to 12m² on sawn granite.
Storage:
Closed, cool and dry. Do not store in temperatures above 25°C. Shelf life of approx. 4 years.
Click here to view this product on the manufacturers website.
Reviews
There are no reviews yet