Lithofin MN Builders Clean is a highly active cleaner that contains the optimal combinations of different kinds of acid, rust preventing and cleaning agents. Comes in 1 Litre bottles.
Lithofin MN Builders Clean dissolves and removes cement and mortar residues, efflorescences, limescale deposits, stubborn ingrained dirt, rust and rust discolourations. The yellowish discolouration which results from iron containing stones rusting is removed and largely prevented.
Lithofin MN Builders Clean is for removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolourations.
Lithofin MN Builders Clean prevents rust discolourations, which occasionally appear when cleaning iron containing stones such as serrizzo, cresciano, calanca, sardo white, etc.
Lithofin MN Builders Clean is suitable for all acid resistant natural stones such as granite, gneiss and quarzite. Please Note: not suitable for polished and finely honed limestones (marble) and manufactured stones. Always try the product in an inconspicuous area prior to use, since especially blue and black “granites” are often damaged.
Density: approx. 1,2 g/cm³
Appearance: liquid, reddish
Odour: pleasant, fresh
pH-Value: < 1 (concentrate)
Flash Point: n.a.
Solubility in Water: complete
Directions for Use:
First wet the surface, then apply diluted with water up to 1:10, depending on the type of dirt – and immediately spread the product evenly on the surface with a scrubbing brush. After a few minutes, scrub the surface then wash away with clean water. Do not allow the product to dry on the surface. In stubborn cases this procedure may have to be repeated. Advice: in case of extremely stubborn, repeated rust discolourations we recommend BERO.
Please Note: This product is not suitable for polished or finely honed surfaces which are sensitive to acid such as limestone, marble, manufactured stone, etc. In cases of doubt, try the product in an inconspicuous area. Surfaces such as chrome, enamel, wood, and similar acid sensitive surface must be protected against splashes and vapours. Acid containing cleaners can develop vapours which may damage sensitive surfaces. We highly recommend carefully washing the product off the surface and ensuring good ventilation during and after use.
Approx. 15 to 30m² depending on dirt.
Up to 50m² on polished surfaces.